IEC62271 Circuit Breaker Dynamic characteristic Tester
I. Introduction
GDGK-306 Hot Sale IEC62271 Circuit Breaker Dynamic characteristic Testeris working onIEC62271, it comes with a display screen 320*240 and rotating interface.
II. Main Functions
| 1 |
Test standard:IEC62271
|
| 2 | Closing and opening time measurement of 12 channels |
| 3 | Max difference of closing or opening time measurement of three phases |
| 4 | C-O and O-C time measurement |
| 5 | Rated operation sequence test |
| 6 | Bounce time and frequency measurement of breaker closing |
| 7 | Circuit breaker closing and opening speed measurement |
| 8 | Travel-time, Coil current-time curve of circuit breaker operation measurement |
| 9 | Travel and clearance of circuit breaker measurement |
| 10 | Variable DC circuit breaker operation power supply |
| 11 | Closing arc resistance value and connected time measurement |
| 12 | Closing time and opening time of graphite circuit breaker measurement |
| 13 | Print test results by internal micro printers |
III. Technique Index
| 1 |
Time measurement range: 6000ms, resolution 0.1ms
|
| Time measurement error <1%RDG+0.2ms | |
| 2 | Speed measurement: |
| Range 2m/sresolution 0.01m/smax error<0.1m/s | |
| Range 20m/sresolution 0.01m/smax error<0.2m/s | |
| 3 | Travel measurement: |
| Range 50.0mm resolution 0.1mmmax error<1%RDG+0.1%FS | |
| Range 300.0mm resolution 1mmmax error<1%RDG+0.1%FS | |
| Range 600.0mm resolution 1mmmax error<1%RDG+0.1%FS | |
| 4 | Coil current measurement range 20.00A, resolution 0.01A, error 2%+0.2%FS |
| 5 | Closing resistance value measurement range: 100~10000ohm, error: 5%RDG |
| 6 | DC Power out: DC30V~250V/20A (instantaneous) |
| 7 | Power supply: AC220V±10% 50Hz±10% |
| 8 | Temperature: -10~40°C humidity: <80% |
| 9 | Size: 360mm*280mm*300mm |
| 10 | Weight: 10kg |
Send product request
Other supplier products
 |
GD-261D Fully-automatic Pensky-Martens Closed Cup Flash Point Tester | Summary This instrument is designed and manufactured as per standardsGB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup methoda... |
 |
GDGS Insulation Material Volume Resistivity Tester | I.Application GDGS automatic tan delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high volt... |
 |
GDJ-1F Brookfield Viscometer | I. Summary The instrument is designed and made according to the requirement of the T0625 “Asphalt Brookfield Rotation Viscosity Test (Brookf... |
 |
GDVA-402 Current Transformer CT PT Testing Equipment | I---General introductionGDVA-402 is a full automatic transformer comprehensive tester.The tester can finish:CT/PT volt-ampere characteristic curve ... |
 |
GD-3536D Fully-automatic Cleveland Open Cup Flash Point Tester | Summary: The instrument is designed and made as per national standard of ChinaGB/T 7600 Standard Test Method for Water Content of Transformer Oil i... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
