HL-1000-D temperature cycling system
HL-1000-D temperature cycling system
Temperature Humidity Chamber
Climatic Chamber
Application:
Climatic Temperature Cycling Test Chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Features:
used for the whole series(R232,R404)
Technical Parameters:
|
Model |
HL-1000-D |
|
Internal Dimensions |
W1000xH1000xD1000 (mm) |
|
External Dimensions |
W1600xH2100xD1450 (mm) |
|
Temperature Range |
Low Temperature D:-40℃; High Temperature 150℃ |
|
Analytic Accuracy/ Distribution Uniformity of Temperature |
|
|
Control Accuracy of Temperature |
±0.5℃ |
|
Temperature Rising/ Falling Speed Rate |
Temperature rising approx. 0.1~3.0℃/min temperature falling approx. 0.1~1.5℃/min; (The Falling Speed Rate Min.1.5℃ per minute is a special optional condition) |
|
Internal and External Material |
Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated. |
|
Insulation Material |
Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials |
|
Cooling System |
Wind cooling or water cooling/single segment compressor(-40℃, double segment compressor -70℃) |
|
Protection Devices |
Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, Over-humidity and over-temperature protection switch, fuses, fault warning system |
|
Optional Accessories |
Inner door with operation hole(Optional), Recorder(optional),Dehumidifier |
|
Compressor |
French Tecumseh Brand, Germany Bizer Brand |
|
Power |
AC380V, 3 Phase 5 Lines,50/60HZ |
|
1000 |
Send product request
Other supplier products
 |
Bursting Strength Tester | Bursting Strength Tester Paper Packing Test Equipment Application: Bursting Strength Testeris used to test the strength and performance of mater... |
 |
Vacuum Chamber | Vacuum Chamber Environmental Test Chambers Application:High Temperature Vacuum Oven is widely used for heating treatment of metal materials in lo... |
 |
HAST Accelerated Aging Chamber | HAST Accelerated Aging Chamber PCT HAST Test Chamber Pressure Cooker Test Chamber HAST accelerated aging chamberapplication:HAST accelerated agi... |
 |
Carton Drop Tester | Carton Drop Tester Paper Packing Test Equipment Carton Drop Tester Application: drop hammer textile tearing testing machine is applied to asses... |
 |
3D Vision Measurement System | 3D Vision Measurement System Video Measuring System Application: 3D vision measurement systemis designed to do three-dimensional work piece on t... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
