Qinsun Auto Fabric Air Permeability Test Apparatus
Testing Standards:
BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737, AFNOR G07-111, ISO 7231
Applications:
The Air Permeability Tester accurately and swiftly determines the resistance of fabrics (woven, knitted and nonwoven textile) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. The air permeability of the fabric is calculated automatically within a short time.
Air Permeability Tester Technical Parameters:
1.Test head: 5cm2, 20cm2, 25cm2, 38cm2, 50cm2, 100cm2;
2.Test mode: Automatic;
3.Pressure range: 10-3000Pa;
4.Air velocity: 0.1-40000mm/s(5cm2);
5.Test time: 5-50s;
6.Deceleration time: 3s;
7.The total test time: 10-58s;
8.Minimum pressure: 1Pa;
9.Maximum pressure: 3000Pa;
10.Accuracy: ±2%;
11.Measurement units: mm/s, cfm, cm3/cm2/s, l/m2/s, l/dm2/min, m3/m2/min and m3/m2/h;
12.Data port: RS232C;
13.Pressure system:automatic pressure adjustment (available for larger test area);
14.Mute suction pump;
15.Automatic identification system for test head and automatic adjustment for pump;
16.Custom setting function for actual need;
17.Automatic switch between coarse and fine adjustments. Fully enclosed pipe ensures leakage lower than 0.1l/m2/s.
Air Permeability Tester Basic Configuration：
Sample Holder 5cm2;
Sample Holder 20cm2;
Sample Holder 25cm2;
Sample Holder 38cm2;
Sample Holder 50cm2;
Sample Holder 100cm2;
Calibration plate
Other supplier products
|
|
Perspiration Tester |
Standards:
ISO 105 E01 E02 E04, BS 1006, AATCC 15 106 107, DIN 54005, M&S C6 C7, NEXT TM4, DIN EN ISO 105 E01 E02 E04, GB/T 3992 5713 5714
... |
|
|
Grease Rapid Extraction Analyzer |
The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container pen... |
|
|
Shoes Heat Insulation Tester |
Applications:
This shoe heat insulation tester is used to determine the heat insulation performance for the whole shoe. Place the specimen (a wh... |
|
|
Random tumble pilling tester |
Random Tumble Pilling Tester
Standards:
ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D
Applications:
Random Tumble Pilling Tester is used to det... |
|
|
fabric vertical flammability tester |
VTEC Vertical Flammability Chamber：
Testing Standards: ASTM D6413-99, DOC-FF 3/71, CALIF TB-117, GB/T 5455, CPAI-84
Applications:
Vertical Fla... |
All supplier products
Same products
