ISO9866 scorch and sublimation color fastness tester
Scorch Tester (Sublimation Fastness tester), to determine fabrics Ironing color fastness and sublimation color fastness, and dimensional stability under hot dry conditions.
Heating plate temperature and test time are adjustable, fitted with microprocessor temperature controller and the top plate with precisely controlled weight. The independent heating plate ensures controlling test temperature and thickness of sample individually.
Sublimation Fastness Tester is suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test, disperse dyes sublimation color fastness test, reactive dye fastness test.
resistant ironing, or sublimation color fastness tester can test the fabric in hot, dry heat treatment of the dimensional stability;
Sublimation Fastness Tester can also test the fabric sublimation color fastness. Sample is placed between the upper and lower heating plate, the upper and lower heating plate temperature is accurately controlled by a separate controller, the heating plate spacing, the weight of the test piece controllable.
Test the temperature range of 120-230 ℃, with regular alarm function, accurate control of the sample time.
Technical Parameters
A, the hot plate for test: Size W100 × D40mm aluminum material (the same from top to bottom)
B, temperature regulation: digital temperature controller, the minimum display 1 ° C (upper and lower one)
C, the timing timer, audible alarm function
D, maximum temperature: 250 ° C
E, hot plate surface pressure: 4 ± 1 KPa (40cm2)
F, Heater: Cartridge Heaters 100V 150W (upper and lower one)
G, outside size: about W250 x D300 x H230mm
Other supplier products
|
|
Surgical Face Mask Air Exchange Pressure Difference Tester |
The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical... |
|
|
Mask BFE Tester |
Bacterial & Viral Filtration Efficiency (BFE/VFE) TesterBacterial Filtration Efficiency Testeris to determine the bacterial filtration efficien... |
|
|
Slip Resistance Tester |
Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequent... |
|
|
Fabric Thickness Gauge |
Fabric Thickness Gauge
Testing Standards:
JIS L1096/L1018, GB/T 3820, ISO 5084
Applications:
Fabric Thickness Gaugeis an apparatus to measure the t... |
|
|
low-temperature Bending Test Machine |
Standards: Chrysler LP-463LB-9-01, Chrysler LP-463KB-13-01, Chrysler LP-463KB-10-01, IFAI J1531, Commercial Standard CS-273-65? Applications: Th... |
All supplier products
Same products
