.

Non-woven Mask synthetic blood Permeability pressure testing equipment

Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood at different test pressures,and can also be used to determine the resistance to blood penetration of other coating materials.

Blood penetration resistance tester Features:

1. The convex sample fixing device can simulate the actual state of use of a mask, leave a test target area without damaging the sample, and distribute the synthetic blood in the target area of the sample.

2. Color touch screen operation.

3. Equipped with a target plate, which can block the high-pressure edge portion of the sprayed liquid flow, and only let the steady-state flow portion be sprayed on the sample, which increases the accuracy and repeatability of the liquid velocity sprayed on the sample.

4. Equip with thermal printer for printing results.

5. The special constant pressure spray device can spray a certain volume of synthetic blood in a controlled time. 3. It can fully simulate the human body's average blood pressure of 10.6kPa, 16kPa, and 21.3kPa spray speeds for testing.



Send product request

To: Qinsun Instruments Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Taber Reciprocating Abraser (Abrader)
Taber Reciprocating Abraser (Abrader) The Wearaser collet assembly comes standard with each Taber Reciprocating Abraser, along with CS-10 and H-18 Wearaser abradants. This permits abras...
Horizontal flame test chamber
Horizontal flame test chamber The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for a...
Filter Tester MFP Nano Plus 4000
Filter Tester MFP Nano Plus 4000 MFP Nano Plus 40000 with U-SMPS Real-time determination of fraction separation efficiency with two UF-CPC in raw and clean gas;MFP filter test rigs...
Radiant Protective Performance Test Device
Radiant Protective Performance Test Device Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter...
Xenon Test Chamber/weather ometer
Xenon Test Chamber/weather ometer IntroductionWeather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal nat...
All supplier products

Same products

HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester Seller: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester Seller: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester Seller: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester Seller: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
HST-01 Heat Seal Tester
HST-01 Heat Seal Tester Seller: Cell Instruments Co., Ltd HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...