High and Low Temperature Humidity Chamber
Product Description
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according toIEC60068-2-1(GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78,IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles.
What is Climate Chamber?
Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chambers or Thermal Chamber or Temperature Chamber
Specifications:
•The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip.
•The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS-232. The temperature accuracy is 0.1ºC and humidity accuracy is 0.1%R.H
•The temperature sensor is platinum PT100Ω/MV
•The independant heating system uses nickel-chrome electric heater
•The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries
•The circulation system uses temperature resistant and low noise air-conditioned motor and multi-blade centrifugal wind wheel
•The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection
•Working Voltage: AC380V±10% 3phases and frequency 50Hz/60Hz
•Working Environmental: Temperature is 5ºC~+30ºC Humidity ≤85%R.H
| High & Low Temperature Humidity Chamber with Programmable Function (GDJS Series) | |||||
| Model (cm) | GDJS-225* | GDJS-500* | GDJS-010* | GDJS-013* | GDJS-015* |
| Workroom Dimensions | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Exterior Dimensions | 105*102*200 | 132*132*217 | 167*152*231 | 217*152*231 | 245*160*231 |
| Work Power | 7.0kW | 13.5kW | 15.0kW | 16.5kW | 16.5kW |
| Temperature Range | A: -20ºC-150ºC B: -40ºC-150ºC C: -60ºC-150ºC D: -70ºC-150ºC | ||||
| Humidity Range | 30%~98% R.H | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Humidity Deviation | -2%~-3% R.H | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
| Temperature Down Speed | 0.7ºC~1.0ºC/min | ||||
| High and Low Temperature Chamber with Programmable Function (GDJW Series) | |||||
| Working Room Size | GDJW-225* | GDJW-500* | GDJW-010* | GDJW-013* | GDJW-015* |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | A: -20ºC-150ºC B: -40ºC-150ºC C: -60ºC-150ºC D: -70ºC-150ºC | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
| Temperature Down Speed | 0.7ºC~1.0ºC/min | ||||
| High Temperature Chamber/Oven Chamber (GW Series) | |||||
| Working Room Size | GW-225 | GW-500 | GW-010 | GW-013 | GW-015 |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | Enviromental Temperature ~150ºC (Option can be max 300ºC) | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
The * in GDJS-225*/GDJW-225* means the temperature range A: -20ºC-150ºC, B: -40ºC-150ºC, C: -60ºC-150ºC,D: -70ºC-150ºC
How does an environmental chamber work?
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food, trolleys, vulcanized rubber, plastic rubber, metal materials and other commodities. The whole process of humidification of the temperature and humidityenvironmental chamberis to increase the working pressure of water vapor. The more initial way is to spray water on the test box wall to control the saturation pressure of the water surface according to the operating temperature.
What'sTemperature Chamberquality difference between LISUN and other brands in China Market?
1. LISUN low temperature such as -60ºC warranty under a 200W lamps with heating but other brands under empty conditions.
2. LISUN adopts with Finland brand electronic humidity sensor which no need to maintenence. But our competitor used dry ball device which is easy dry to cause problems after used 3-6months.
3. LISUN equipped a water purification device, customer can use a water pipe connect it to provide water supply directly, our competitor but need to add the water by hand.
4. LISUN temperature chamber key electrical connector parts adopted with famous brand AC contactor and solid state relays fromOmron brands. It is easy for you to find in your local market if they were failed, but our competitors used them with almost Chinese local brands.
Send product request
Other supplier products
 |
High Precision Rotation Luminaire Goniospectroradiometer | LSG-1890BCCD/LSG-1800ACCD goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measur... |
 |
Electrostatic Discharge Simulator | Product Description ESD simulator guns(Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance withIEC 61000-4-2,E... |
 |
Portable CCD LED Colorimeter Spectroradiometer | The Portable CCD LED Colorimeter Spectroradiometer has the following versions which can measure different parameters: LISUN Model Functio... |
 |
High Precision Rotation Luminaire Goniophotometer | What is goniophotometer definition? LSG-1890B/LSG-1800Agoniophotometeris automatic goniophotometric instrument for luminous intensity distribution... |
 |
Lamp Start, Run-up time and Flicker Test | Product Description LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer - Flicker Tester is equipped with Class A fast photometric pr... |
Same products
 |
MECHANIC MEC 4K 2K HD Electronic Eyepiece Camera for Stereo Microscope | Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) | Description Mechanic MEC 2K/2K PRO/4K HD Electronic Eyepiece Camera can convert a Binocu... |
 |
Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester | Seller: PHONEFIX technology Co.,Ltd | iFixes 10CC半透明/全透明/乳白/浅黄色无铅焊膏适用于手机主板CPU BGA维修。iFixes Solder Flux注射器注射焊膏焊膏手机修整焊接耗材系列，适用于电路板纳米芯片、手机... |
 |
HTT-02 Hot Tack Tester | Seller: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... |
 |
SPC-01 Stretch Film Peeling Cling Tester | Seller: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... |
 |
FTT-01 Film Thickness Tester | Seller: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... |
