Positive pressure tester for medical syringes
Product introduction
The positive pressure tester for syringe cohesion is composed of intelligent manipulator,
force measuring mechanism, distance measuring group mechanism, printer and so on.
Among them, the intelligent driver is composed of CPU, motherboard, LCD display screen,
keyboard, power supply and other parts. Implement GB 15810 standard requirements,
positive pressure test principle, check the syringe's tight fitting performance.
Reference standard
GB/T 15810-2001 "Disposable sterile syringe", YY/T 0909-2013.
Test principle
The syringe is sucked into the nominal capacity of water, with the specified axial pressure
and lateral force, the effect on the core rod is 30s, and the part of the jacket and the piston
shall not have leakage phenomenon. Under the effect of 88KPa negative pressure, adhere to
60s±5s, the contact part of the jacket and the piston shall not produce air leakage, and the
piston and the core rod shall not be separated.
Technical parameters
1. Lateral force: 0.25 — 3.00N, error is not more than ±0.5%
2. Axial pressure: 100 — 400kPa, error is not more than ±2%
3. Nominal capacity: 1 — 200ml, optional
4. Test time: 0 — 9999 seconds, arbitrary setting
5. Working temperature: 5 — 40℃
6. Relative humidity: （45 — 80） %
Send product request
Other supplier products
 |
Sanitary Napkin Absorption Speed Tester | Main uses: The absorption speed tester is used to measure the absorption speed of sanitary napkins, menstrual napkins, diapers, etc., reflecting w... |
 |
Dry fallen wadding tester G275 | G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly app... |
 |
Plastic Pipe Hydrostatic Pressure Burst Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla... |
 |
Socks wear meter | Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor... |
 |
ROSS zigzag tester | Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
