International rubber hardness tester
Technical parameters:
1, hardness effective measurement range: 30-95IRHD
2, initial load （contact force） : 8.3±0.5mN
3, the main load （pressure such as force） : 145±0.5mN
4, total force: 153.3±1.0mN
5, pressure on the foot force: 235±30mN
6, pressure ball diameter: 0.395±0.005mm
7, pressure foot diameter: 3.35±0.15mm
8, the thickness of the standard test piece is 2mm±0.5mm （the thickness of the rubber test piece can be measured from 1 to 6.5mm）
9, can be measured rubber O-ring diameter range: Φ1——Φ6.5mm
10, AC power supply: 220V±10%, 50HZ
11,Overall size: 250×280×290mm
12,Weight: 10 kg
Meet the standard:
GB/T6031-2017, ISO48 international standard, ASTM D1415 standard, etc
Send product request
Other supplier products
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified in ... |
 |
Humidifying Bottle Performance Tester | The main uses, compliance standards, and technical parameters of the humidifier bottle performance tester are as follows: Main Uses The humidifie... |
 |
Solid electrolyte analysis system | Standard ISO 9001:2015 (Quality Management System) ASTM E1970-21 (Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2 (Secondary... |
 |
Pre-filled Syringe Push Force Meter | The Push - force Tester for Prefilled Syringes is widely used in the medical device industry, mainly for testing the push - force performance of pr... |
 |
Safety Helmets Wearing Stability Tester | Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
