.

BBA steady state solar simulator tester

BBA steady state solar simulator tester
  • BBA steady state solar simulator tester
Produced by: Standard International Group (HK) Limited

All supplier products
Send product request

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • ISO 9060: Solar Energy – Classification of Pyranometers
  • CE Certification(Conformité Européenne)

Product Advantages

  1. BBA-Grade Performance
    • Class B Spectral Matching: Ensures AM1.5G compliance for accurate energy rating.
    • Grade B Irradiance Uniformity: <5% deviation across 2.0m × 1.0m test area.
  2. Multi-Mode Testing
    • STC/NOCT/Hotspot Simulation: Replicates standard test conditions, nominal operating cell temperature, and thermal runaway scenarios.
    • 1,000 W/m² Tuneability: Adjustable irradiance for low-light performance mapping.
  3. Stability First
    • Class A Transient Stability: <2% flicker during pulsed load testing.
    • Metal Halide Lamp Longevity: 5,000-hour lifespan with <10% lumen depreciation.
  4. Smart Control
    • AI-Powered Irradiance Correction: Compensates for lamp aging in real-time.
    • Remote Calibration: Wi-Fi/Ethernet connectivity for ISO 17025 compliance.
  5. Safety First
    • UV Filter: Blocks harmful UVC radiation during operator access.
    • Emergency Shutoff: Dual redundant safety circuits with GPS-enabled alerts.

Product Features

  • 2.0m × 1.0m Test Area: Accommodates full-size 72-cell modules and small BIPV panels.
  • 6-Axis Robotic Arm: Automates IV curve tracing and EL imaging positions.
  • 10” Sunlight-Readable HMI: Preloaded IEC 61215/61646 test sequences with customizable dwell times.
  • Self-Cleaning System: Automated lamp housing purging for dust-free operation.
  • Modular Design: Expandable from 1 kW to 10 kW for pilot-scale production lines.

Technical Parameters

ParameterSpecification
Irradiance Range 200–1,200 W/m² (AM1.5G filtered)
Spectral Matching Class B (IEC 60904-9)
Uniformity Grade B (<5% deviation)
Stability Class A (<2% transient flicker)
Lamp Type Metal Halide (400 nm–1,100 nm output)
Test Area 2,000mm (W) × 1,000mm (D)
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 2,500mm (W) × 1,500mm (D) × 2,200mm (H)
Weight 1,800 kg (net) / 2,500 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x PV module test fixtures (adjustable for frameless/framed modules).
    • 10x Type T thermocouples with ceramic insulation.
  2. Software Suite:
    • License key forSolarSim Pro(Windows/Linux).
    • 1-year free access to cloud-based PV simulation tools.
  3. Calibration & Safety:
    • NIST-traceable irradiance meter.
    • UV safety goggles (Class 1, 3 pairs).
  4. Maintenance Kit:
    • Spare metal halide lamps and igniters.
    • Lamp cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

KES - NDG5 Puncture Strength Tester
 KES - NDG5 Puncture Strength Tester Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) SAE J2749 (Automotive Composite Testing) JI...
Safety Helmet High Temperature Pre-Treatment Chamber/ head protection thermal testing equipment / Helmet high temperature pre-treatment chamber
Safety Helmet High Temperature Pre-Treatment Chamber/ head protection thermal testing equipment / Helmet high temperature pre-treatment chamber Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Te...
Gelbo Flex flexing chamber
 Gelbo Flex flexing chamber Standards: YY/T 5056.6 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 4: ...
Static Tensile Tester ASTM D3107
 Static Tensile Tester ASTM D3107 Standards: Standard Accordance with the requirements of the standards such as ASTM D3107 Applications: Static Tensile Tester isused for static t...
Surface Flammability Tester
 Surface Flammability Tester Surface Flammability Tester - Toy test equipment price and quotation - standard Standards: 1、GB/T 8745-2001《textile Combustion performance fabr...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
 Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...