Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine
Standard
- YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, frequency, and failure criteria.
- YY/T 1560-2017 (China): Defines methodologies for evaluating the fatigue strength of spinal implant assemblies under complex loading.
- ASTM F1717-18 (International): Standard test methods for spinal implant constructs in vertebrectomy models.
- ASTM F2706-19: Specifies static and fatigue testing requirements for occipito-cervical and occipito-cervico-thoracic spinal implants.
Product Advantages
- High-Frequency Stability: Advanced electromagnetic actuator maintains 0.1–15 Hz frequency range with ±0.05% force accuracy.
- Ultra-Precision Loading: 50 kN axial force capacity with 1 N resolution for submicron displacement control.
- Dynamic Load Control: Programmable R=0.1–10 load ratios with real-time stiffness compensation.
- Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with 20±2 g/L protein concentration.
- Extended Durability: Capable of 10+ million cycle testing with <0.2% drift in calibration.
- Modular Design: Six-station configuration allows parallel testing of multiple specimens.
Product Features
- Electromagnetic Servo Motor: 50 kN axial force capacity with programmable load ratios (R=0.1–10).
- Triaxial Strain Gauge: Measures axial/radial strains simultaneously (0.1 με resolution).
- Dynamic Load Control: 0.1–15 Hz frequency range with programmable waveforms (sine, square, random, custom).
- Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
- High-Resolution Imaging: Optional integration with micro-CT systems for in-situ crack analysis.
- Safety System: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±50,000 N (50 N resolution) |
| Frequency Range | 0.1–15 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Axial Displacement | ±15 mm (0.1 μm resolution) |
| Temperature Control | -20°C to +50°C (PT1000 sensors) |
| Humidity Control | 10–95% RH (non-condensing) |
| Data Sampling Rate | 100 kHz (synchronized across 16 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 3,500W |
| Dimensions (W×D×H) | 2,200 × 1,600 × 2,300 mm |
| Weight | 1,350 kg (including environmental chamber) |
| Noise Level | <65 dB (A-weighted) |
Accessories
- Spinal Implant Fixture Kit:
- Self-centering pedicle screw clamps (4.5–7.5 mm diameter compatibility)
- Rod-bending jigs with laser-aligned loading anvils
- Thermal-Mechanical Chamber:
- 25L capacity with rapid cooling/heating (15°C/min)
- 316L stainless steel interior with HEPA filtration
- CompressionMaster Pro Software:
- Automated stiffness degradation tracking and fatigue limit calculation
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via dedicated iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.5–50 Nm)
- Specimen alignment gauges (ASTM F1717 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Strain gauge verification tool
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure with 30 dB noise reduction
Send product request
Other supplier products
 |
Shoes Heat Insulation Tester | Applications: This shoe heat insulation tester is used to determine the heat insulation performance for the whole shoe. Place the specimen (a wh... |
 |
Diesel Water Ash Sulfur Mixing Tester | Meet the standard: ASTM D6304 ASTM D1744 ASTM D95 ASTM D482 ASTM D2622 ASTM D5453 ASTM D1266 Product Introduction: Analysis of water, ash, ... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequen... |
 |
Carton drop tester | Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: GB/T4857.5, 1S02248, etc. Applications... |
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
