Bone Cement Four-Point Bending Fatigue Tester
Standard
- YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading.
- ISO 16402 (International): Defines protocols for determining the fatigue life of bone cements in simulated physiological environments.
- Additional alignment with ASTM F2118 for constant load fatigue testing of polymer-based bone cements.
Product Advantages
- Dual-Environment Testing: Integrated water bath chamber (37°C ±0.5°C) simulates in-vivo conditions for clinically relevant data.
- Precision Fatigue Analysis: 0.01Hz–50Hz frequency range captures both low-cycle and high-cycle fatigue behavior.
- Automated SOP Execution: Pre-loaded test protocols for YY/T 1429 and ISO 16402 ensure regulatory compliance.
- Real-Time Fatigue Monitoring: Live S-N curve plotting and crack propagation detection via acoustic emission sensors.
- Modular Specimen Clamping: Quick-release fixtures accommodate rectangular beam specimens (2×4×30mm to 6×12×60mm).
- Data Integrity: Blockchain-timestamped results prevent tampering and simplify audit processes.
Product Features
- Four-Point Bending Configuration: 30–100mm span adjustable for standardized (ISO) or custom specimen geometries.
- Electrohydraulic Actuator: Delivers sinusoidal, square, or random vibration waveforms up to 1kN force.
- Thermostatic Water Bath: Dual-zone temperature control (15–50°C) with anti-evaporation lid system.
- High-Speed Data Acquisition: 16-bit resolution at 10kHz sampling rate captures transient failure events.
- AI-Assisted Analytics: Machine learning algorithms predict fatigue life from partial test data.
- Safety Interlock System: Emergency stop, over-temperature protection, and breakaway specimen holders.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±1,000 N (axial) |
| Frequency Range | 0.01–50 Hz (sinusoidal/square wave) |
| Temperature Control | 15–50°C ±0.5°C (water bath) |
| Force Resolution | 0.01 N (0–100N); 0.1 N (100–1,000N) |
| Displacement Range | ±5 mm (0.1 μm resolution) |
| Test Span Adjustability | 30–100 mm (ISO-compliant presets) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 800W |
| Dimensions (W×D×H) | 900 × 700 × 1,600 mm |
| Weight | 320 kg (including water bath) |
| Noise Level | <65 dB (A-weighted) |
Accessories
- Four-Point Bending Fixture Kit:
- Anodized aluminum load frames with laser-marked span indicators
- Self-aligning specimen grips (2–6mm thickness compatibility)
- Thermostatic Water Bath:
- 10L capacity with recirculation pump for temperature uniformity
- Corrosion-resistant stainless steel construction
- FatigueMaster Pro Software:
- Automated S-N curve generation
- Crack initiation detection (acoustic emission integration)
- 21 CFR Part 11-compliant audit trail
- Operator Kit:
- Calibrated micrometer set (0–25mm)
- Specimen preparation templates (ISO 16402 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Temperature verification thermocouple
Send product request
Other supplier products
 |
Falling ball impact testing machine | Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials and coatings. Perf... |
 |
Melt Index Tester | Main uses: The melt flow rate meter uses automatic sampling and balance weighing to determine the volume flow rate (MFR) of thermoplastic melts ac... |
 |
Vehicle Cabin Air Filter Tester | Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration... |
 |
Toilet Corrosion Test Chamber (HCl and Ammonia) | Product Description: Toilet seat hydrochloric acid and ammonia corrosion tester is used for testing to evaluate the ability of toilet seat product... |
 |
Electric hook core bending resistance testing machine | The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. Insert the hook core in... |
Same products
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Seller: Kelilong Electron Co.,Ltd | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
 |
PH-808 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-808 Range PH ～14.00PH Temp 0～50℃ ... |
