Mechanical load testing machine for photovoltaic modules

The Mechanical Load Testing Machine for Photovoltaic Modules is engineered to evaluate the mechanical durability of both crystalline and thin-film PV modules under static and dynamic load conditions. By simulating snow, wind, hail, and debris impacts, the system ensures modules meet international mechanical reliability standards. It is suitable for R&D, quality assurance, and certification laboratories.

Application

Static and dynamic mechanical load testing of crystalline PV modules (framed/frameless).

Fatigue testing under pulsating wind or snow load conditions.

Hail and debris impact simulation for module safety evaluation.

Research and development for thin-film PV modules and flexible panels.

Standards

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification (Conformité Européenne)

Features

Multi-Standard Compliance: Simulates forward/reverse loads and dynamic fatigue cycles according to IEC standards.

Ultra-Precise Control: 0.1 N force feedback and ±5% pressure accuracy for reproducible results.

Automated Testing: Programmable cycle counts with AI-assisted real-time crack detection via EL imaging.

Safety First: Dual redundant emergency shutoff, load cell override, and overload protection at 6,000 Pa.

Modular Design: Quick-change fixtures accommodate framed, frameless, and flexible modules; expandable test area up to 3.0m × 2.0m.

User-Friendly Operation: 10” touchscreen HMI with preloaded IEC/UL test sequences and customizable pressure profiles.

Robust Construction: 304 stainless steel frame with epoxy coating ensures long-term durability.

Remote Monitoring & Self-Calibrating: Wi-Fi/Ethernet connectivity and auto-tare/linearity checks before each test.

Parameters

Parameter	Specification
Test Area	2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load	5,400 Pa (adjustable)
Reverse Load	2,400 Pa (adjustable)
Dynamic Load	1,000 Pa, 1,000 cycles (7s+3s timing)
Pressure Accuracy	±5% of setpoint
Force Sensor	0.1 N resolution, 10 kN capacity
Power Supply	230V AC, 50/60Hz (single-phase)
Air Supply	6–8 bar (clean/dry air required)
Weight	1,200 kg (net) / 1,500 kg (gross)

Accessories

Testing Kit: 4x PV module clamping fixtures (adjustable for 16–40 mm frames), 10x load distribution pads (anti-skid rubber)

Software Suite: License key for LoadTest Pro (Windows/Linux), 1-year free access to cloud-based fatigue analysis tools

Calibration & Safety: NIST-traceable pressure gauge, safety harness kit for large modules

Maintenance Kit: Spare O-rings and cylinder seals, machine cleaning solution (non-corrosive)

Documentation: Multilingual quick-start guide (printed + digital)

Test Procedures

Mount PV modules securely on the clamping fixtures.

Select the desired test profile on the touchscreen HMI (forward/reverse load or dynamic cycle).

Set the number of cycles and load parameters according to IEC/UL standards.

Start the test and monitor pressure and force readings in real-time.

Inspect modules after test completion using EL imaging for crack or delamination detection.

Export test data and generate a standardized report for QA or certification purposes.

Maintenance Information

Regularly inspect cylinders, O-rings, and load distribution pads for wear.

Clean the frame and fixtures to prevent dust accumulation.

Verify force sensor calibration periodically using NIST-traceable standards.

Check air supply quality (clean/dry) to ensure consistent pneumatic operation.

Test emergency shutoff and overload protection circuits monthly.

Other supplier products

	Thermal cycle wet freezing testing machine	The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental testing, capable of simulating extreme temperature and h...
	Flame Spread Tester	The tester is used for flame spread test of protective clothing. It is designed and manufactured according to ISO 15025 Standard for Protective Clo...
	UV curing light box	Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu...
	Photovoltaic module wire tube bending testing machine	The Photovoltaic Module Wire Tube Bending Testing Machine is designed to evaluate the mechanical durability and fatigue resistance of PV module out...
	Micro Controll High-temperature Friction Test device	Applicable Standards When conducting tests, the microcomputer - controlled high - temperature friction testing machine usually needs to comply wit...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...