Carpet Dynamic Load Tester
Compliance Standards
ISO 2094: 1999 (BS)
QB/T 1091-2001
ASTM D3574 TEST I4
Instrument Features
Provide information on the reduction in the thickness of carpet pile Imitate the pressure and shearing effects generated by walking Adopt British and international standard testing methods
Product Details
This instrument is also known as a dynamic load machine. It provides information on the reduction in the thickness of carpet pile by imitating the shearing effects of two actions: the pressure during walking and that from the edges of shoes.
Testing Method
The load has two rectangular steel feet with dimensions of 51 mm×6.3 mm and a height of 9.5 mm. The load is lifted by a cam through a cantilever mounted on a pivot and is made to perform a free - fall motion at a controllable height above the carpet sample every five seconds. The steel plate holding the sample moves slowly and continuously back and forth so that the metal plate moves 3.2 mm each time the load falls. There is a semi - overlapping area for each impact. Twenty - five impacts form a complete back - and - forth movement, creating a stressed area that is 90 mm long and 50 mm wide.
Technical Parameters
Dimensions: W500 mm, D500 mm, H370 mm Power Consumption: 250 W
Send product request
Other supplier products
 |
Metal Corrosion Rate Measurement Device | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
 |
Battery Slurry Resistance Tester丨Battery Slurry Resistance Test Mechine | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement o... |
 |
Waterproof socks testing machine | Shoes Water Penetration Test Apparatus is used to test waterproof performance of shoes socks and shoes lining of rubber shoes. Standards: HG/T366... |
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
 |
Button Impact Machine | With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
