.

Carpet Pilling and Fuzzing Tester

Instrument Description

This instrument is used to simulate the pilling and fuzzing phenomena that occur during the normal use of carpets. The instrument contains a roller covered with nylon, which can generate a frictional motion with a set number of cycles on the surface fibers of the sample. Then, observe the appearance changes of the sample.

Relevant Standards

GB/T21196 - 2007. GB/T4802.2. GB/T13775. FZ/T20020. ASTM D4970. ISO12945 - 2. ASTM D4966. ASTM D3886. ISO12947. JIS L1096. IWS TM196. TM112. M&S

Application Scope

It is used for performance tests of abrasion resistance, wear - and - tear, and appearance changes (pilling) of textiles and membrane materials.

Working Principle

The circular textile sample rubs against the standard abrasive along the motion trajectory of the Lissajous curve under a certain pressure, resulting in sample damage. The abrasion - resistant performance of the textile is represented by the number of abrasion cycles until the sample is damaged.

Parameters

Rollerdimensions:Ø63mm×60mmwide
Rollermass:2.0±0.1lb(0.91±0.05kg)
Reciprocatingstroke:150±5mm
Reciprocatingfrequency:60±2cyclesmin⁻¹
Testcycles:selectable1–9,999(commonly1,000cycles)
Samplesize:min.180mm×180mm
Maximumsamplethickness:25mm
Workingarea(testbed):220mm×220mm


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Automatic voltage internal resistance tester
Automatic voltage internal resistance tester The Automatic Voltage & Internal Resistance Tester is a precision electrical testing instrument designed for rapid and accurate measurement of ...
Floor Caster Wear Tester
Floor Caster Wear Tester The Floor Caster Wear Tester is designed to evaluate the wear resistance of chair casters on various floor coverings, including resilient and lamin...
Torque - to - Failure Tester for Metal Bone - connecting Screws
Torque - to - Failure Tester for Metal Bone - connecting Screws Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai...
Enamel Boiling Water Resistance Evaluation Tester (for Enamel Boiling Water Resistance Tester)
Enamel Boiling Water Resistance Evaluation Tester (for Enamel Boiling Water Resistance Tester) Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287...
Large-Scale Composite Salt Spray Test Chamber,Drive-in Corrosion Test Rooms
Large-Scale Composite Salt Spray Test Chamber,Drive-in Corrosion Test Rooms TheLarge-Scale Composite Salt Spray Test Chamberis a professional environmental simulation instrument designed to replicate complex corrosion condi...
All supplier products

Same products

Full-Body Garment Stress Tester,FZ/T 70015
Full-Body Garment Stress Tester,FZ/T 70015 Seller: Standard International Group (HK) Limited TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
Industrial Dry Cleaning Machine,industrial garment steamer
Industrial Dry Cleaning Machine,industrial garment steamer Seller: Standard International Group (HK) Limited TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
MST Medical Compression Stocking Tester,compression sock tester
MST Medical Compression Stocking Tester,compression sock tester Seller: Standard International Group (HK) Limited The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Seller: Standard International Group (HK) Limited Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
Dental material color stability tester
Dental material color stability tester Seller: Standard International Group (HK) Limited Application The applications of color stability testers for dental materials are mainly reflecte...