Salt Spray Testing Machine
Meet the standard:
GB/T2423.17
Product Introduction:
This type of salt spray test chamber is one of the artificial climate environmental “three antis” (damp heat, salt spray, mold) testing equipments and an important testing equipment for researching the adaptability and reliability of various products in industries such as machinery, national defense industry, light industry electronics, and instrumentation under different environments. This salt spray corrosion test chamber can conduct neutral salt spray tests in accordance with GB/T2423.17 “Basic Environmental Testing Procedures for Electric and Electronic Products - Test Ka: Salt Spray Test Method” and can also carry out acetic acid salt spray tests.
Features：
Intelligent Temperature Control Instrument: It adopts the intelligent temperature control instrument produced by RKC Corporation of Japan. This instrument has a high degree of intelligence, with multiple sets of PID operation and fuzzy control, fast self-tuning, achieving smoother control output and higher control accuracy.
Automatic Timing Device: After the test chamber reaches the preset temperature, it starts automatic spraying. When the time set by the timer is reached, it stops automatically.
Transparent Top Cover for Test Chamber: The test chamber can be equipped with a transparent top cover, allowing for real-time monitoring of the spray status and the working condition of the specimens at any time.
Non-clogging Nozzle: The nozzle adopts a non-crystallizing injection nozzle, eliminating the worry of salt blockage.
Double Pressure Adjustment and Over-temperature Protection Devices: It is equipped with double pressure adjustment and over-temperature protection devices.
Technical Parameters：
| Model | YWX/Q - 150 | YWX/Q - 250 | YWX/Q - 750 | YWX/Q - 010 | YWX/Q - 016 | YWX/Q - 020 |
|---|---|---|---|---|---|---|
| Chamber Dimensions (mm) | 500×630×450 | 550×900×600 | 750×1100×600 | 1000×1300×600 | 1000×1600×800 | 1000×2000×800 |
| Temperature Range (°C) | 35 - 55 | |||||
| Temperature Fluctuation (°C) | ±0.5 | |||||
| Temperature Uniformity (°C) | ±2 | |||||
| Salt Spray Deposition Rate (ml/2000px²·h) | 1 - 2 | |||||
| Tests Capable of | Neutral, CASS, etc. |
Send product request
Other supplier products
 |
Molten Metal Penetration Resistance Tester | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
 |
Particle Strength Tester | Standard ASTM D4179: Standard Test Method for Single-Pellet Pressure Resistance of Catalysts and Catalyst Carriers ASTM D6175: Standard Test Me... |
 |
fabric wet adhesion performance tester | Product Overview The Fabric Wet Adhesion Performance Tester is a precision instrument designed to evaluate the adhesion behavior of clothing fab... |
 |
Plastic ball indentation hardness tester | Meet the standard: JTG E50 T1143-2006.SL/T.JT/T 521- Appendix A-2004.JTS-206-1- Appendix B B.3-2009 JTS/T245-2023.etc. Instrument features: Cus... |
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Automatic Flash Point Tester designed for accurate and repeatable determination of the flash point of petroleum products using the Pensky-Martens c... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
