Diaper Anti-Side Leakage Performance Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side leakage performance of diapers. It is widely used in the research and development, quality control, and performance testing of baby diapers, adult diapers, sanitary napkins, and other absorbent hygiene products. This instrument provides reliable, quantitative data to guide material design, production optimization, and product performance improvements.
Application
(1) Baby diapers, training pants, and pull-up diapers
(2) Adult incontinence diapers and absorbent briefs
(3) Sanitary napkins, panty liners, and menstrual products
(4) Absorbent underpads, bed pads, and protective sheets
(5) Nonwoven materials, superabsorbent polymers (SAP), and top sheet materials
(6) Liquid barrier and acquisition layers in diaper prototypes
(7) Laboratory testing of raw materials and finished products
(8) Production line quality control and pre-shipment inspection
Standards
The instrument is designed to meet multiple national and international standards, including:
(1) GB/T 28004.1-2021 — Diapers Part 1: Baby Diapers
(2) GB/T 28004.2-2021 — Disposable Diapers Part 2: Adult Diapers
(3) EDANA 152.0-99 — Absorbency Test Method for Nonwoven Materials
(4) ISO 9073-11 — Textiles — Test Method for Liquid Loss in Nonwovens
(5) ASTM F1911 — Standard Test Method for Absorbency of Disposable Hygiene Products
(6) JIS L 1096 — Testing Methods for Disposable Absorbent Products
Features
(1) Measures key liquid retention and leakage properties for accurate performance evaluation.
(2) Adjustable pressure and timing controls to simulate real usage conditions.
(3) Suitable for various product types, including baby and adult diapers, sanitary napkins, and absorbent pads.
(4) High-precision measurement ensures repeatable and reliable results.
(5) User-friendly interface for easy operation and monitoring.
Parameters
| Parameter | Specification |
|---|---|
| Test range | 0–500 ml (depending on instrument model) |
| Measurement accuracy | ±0.5 ml |
| Sample diameter | 40 mm |
| Test area | 20 cm² |
| Pressure range | 0–200 kPa (or higher) |
| Time control | 0–999 s |
| Power supply | AC 220V, 50/60 Hz |
| Overall dimensions | Dependent on model |
| Weight | Dependent on model |
Accessories
(1) Main unit ×1
(2) Sample holders ×2
(3) Instruction manual ×1
(4) Power cable ×1
(5) Calibration weights or pads (if applicable)
Test Procedures
(1) Prepare the sample and place it in the designated holder.
(2) Adjust the test pressure and set the required test time.
(3) Pour the standard test liquid onto the sample.
(4) Start the test and allow the instrument to measure liquid loss and side leakage.
(5) After the test, record the measurement data.
(6) Clean the sample holder and instrument surface before the next test.
Maintenance Information
(1) Regularly clean the sample holder, test platform, and liquid channels to prevent residue buildup.
(2) Check electrical connections and ensure proper grounding before operation.
(3) Calibrate the instrument periodically to maintain measurement accuracy.
(4) Avoid exposure to corrosive liquids or extreme environmental conditions.
(5) Replace worn or damaged parts promptly according to the manufacturer’s instructions.
Send product request
Other supplier products
 |
Anti-rust salt fog chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The chamber is designed to comply with international and domestic corrosion test... |
 |
Ultra-high vacuum tribometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester is designed to support test methods referenced in the following stand... |
 |
Bending Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength ... |
 |
Electric Toothbrush Air Tightness Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electric Toothbrush Air Tightness Testing Equipment is a dedicated instrument used to e... |
 |
Electric pencil hardness tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electric Pencil Hardness Tester is designed to determine the surface hardness of coatin... |
Same products
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Seller: Kelilong Electron Co.,Ltd | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
 |
PH-808 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-808 Range PH ～14.00PH Temp 0～50℃ ... |
