The maintenance of Refrigerated high-speed centrifuge

• 

Refrigerated high-speed centrifugeintroduction: With refrigeration, generally at 4 degrees centrifugation, the lowest temperature that the machine can reach should be around -20 to -9 degrees. For large-capacity refrigerated centrifuges, the number of revolutions is generally not too high, generally at 4000-5000 rpm. In order to ensure its speed and efficiency, it should be well maintained and maintained.
The 6 rules for the maintenance of Refrigerated high-speed centrifuges can be read as follows:
1. The main power plug should be removed when the instrument is not used for a long time or when repairing. Otherwise, the instrument will be charged, especially when it is repaired.
2. Refrigeration centrifuge In order to protect the refrigeration compressor, the interval between the instrument and the energization must be greater than 3 minutes, otherwise the compressor will be damaged.
3. When the rotor is not in use, it should be taken out from the centrifugal chamber, cleaned and dried with a neutral detergent solution in time to prevent chemical corrosion and stored in a dry and ventilated place. It is not allowed to scrub the rotor with a non-neutral cleaner. It is not allowed to blow (dry) the dry rotor with electric hot air. A small amount of grease should be applied to the center hole of the rotor.
4. When using the centrifuge rotor, be sure to set the rotor number correctly. If the rotor number is set incorrectly. This can cause the rotor to overspeed or fail to achieve the desired centrifugation. In particular, the use of speeding can cause a vicious accident in which the rotor bursts, and it must not be negligent.
5. To ensure the freezing effect, when the ambient temperature is higher than 30 °C, the rotor and the centrifugal chamber should be pre-cooled, and the rotor should also reduce the speed by 15%.
6. Centrifuge tubes should be updated regularly, and it is strictly forbidden to use centrifuge tubes that are near the rupture.

Email:
Source:

Other supplier products

	High Speed Microcentrifuge	High Speed Microcentrifuge is especially suitable for micro-filtration at high speed. The general speed is 16000r/min, and the capacity is relative...
	Large capacity centrifuge Main technical performance	Large capacity centrifugeMain technical performance 1. Microcomputer control, DC brushless motor drive, stable operation, low noise and high speed...
	Low-speed centrifuge	Low-speed centrifugeis a common model in the laboratory. The speed of the low speed centrifuge is lower than 10,000 rpm / min. The total volume of ...
	The role of pharmaceutical centrifuges is very important	As a high-tech, pharmaceutical technology of??has opened up broad prospects for the development of related industries such as medical industry and ...
	Cyto Centrifuge	Maintenance ofCyto Centrifuge 1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first....

Same products

	H2500R-2 4x1000mL High Speed Refrigerated Centrifuge	Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd.	H2500R-2 Large Capacity High Speed centrifugation in chemistry H2500R-2 high speed refrigerate...
	H2100R 4x750mL High Speed Refrigerated Centrifuge	Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd.	H2100R Benchtop Large Capacity High Speed Refrigerated Centrifuge Model H2100R is an advanced ...
	H2050R 4x750mL High Speed Refrigerated Centrifuge	Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd.	H2050R Benchtop Large-Capacity High Speed Refrigerated Centrifuge 12 kinds of rotors are avail...
	H2050R-1 4x750mL High Speed Refrigerated Centrifuge	Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd.	H2050R-1 Large-Capacity High Speed Refrigerated Centrifuge 12 kinds of rotors are available fo...
	H1850 4x100mL High Speed Centrifuge	Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd.	H1850 Benchtop High Centrifuge 15 rotors and many kinds of adapters are available for H1850. 6...