Low Temperature Test
Low temperature test: The temperature during the test is not changed under a certain fixed temperature condition, depending on the actual use environment profile of the product and the purpose of the test.
It can be a storage test or a work test. It can be natural or artificialenvironmental conditions.
Failure Mechanism Of Low Temperature Test
|
Test parameters |
Main influence |
Typical failure results |
|
Low Temperature |
Embrittlement; icing; viscosity increase and solidification; the decrease of mechanical strength; physical shrinkage. |
Insulation failure, cracking, mechanical failure, increased wear of moving parts due to shrinkage or loss of lubricant performance, failure of seals and seals. |
Test Capability of ORT Low Temperature Test
Applicable standards: IEC 60068-2-1, GB/T 2423.1, MIL-STD-810H, MIL-STD-883K, MIL-STD-202G, GJB 150A, GJB 360B, GJB 548B, GB/T 28046.4, ISO 16750- 4. YD/T 2379, ETSI 300 019-2, GR-63, GR-487, etc.
Low Temperature Test Gallery
As one of tic industry companies, we have types of tic testingfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
CQC Certification | CCCCQCis the English abbreviation of China Quality Certification Center. The certificate is issued by the China Quality Certification Center CQC (t... |
 |
CQC Certification | CQC China is the English abbreviation of China Quality Certification Center. The certificate is issued by the China Quality Certification Center CQ... |
|
|
Low Temperature Test | Low temperature test: The temperature during the test is not changed under a certain fixed temperature condition, depending on the actual use envir... |
 |
Metal Halide Lamp Test | The metal halide lamp is a gas discharge light source that can provide a spectral energy distribution similar to that of direct radiation and scatt... |
 |
Mold Test | The purpose of the mold environmental testing is to evaluate the range of mold growth of the sample, and the effect of mold growth on the appearanc... |
Same products
 |
Good Quality Manufacturer XP-607 Professional Trinocular Polarizing microscope | Seller: Ningbo HuaSheng Precision Technology Co.,Ltd | XP-607LP Transmission & Reflection polarizing microscope is a professional laboratory instrum... |
 |
Steam Aging Test Chamber Of Structure, Installation And Operation | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Steam aging test is applicable to electronic connectors, semiconductor ICs, transistors, diodes, ... |
 |
OTA Amplitude And Phase Calibration Test System | Seller: Hangzhou Yonghe Technology Co., Ltd | OTA Amplitude And Phase RF Calibration TestSystem Active phased array rf antennais composed of... |
 |
Mechanical Shock Test | Seller: Shen Zhen ORT Technical Service Co.,Ltd | Mechanical shock is the mechanical stress that a product often encounters during its life cycle. ... |
|
|
Low Temperature Test | Seller: Shen Zhen ORT Technical Service Co.,Ltd | Low temperature test: The temperature during the test is not changed under a certain fixed temper... |
