Safety Helmet Impact Acceleration Tester
Purpose
This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.
Standard
GB / T 2812-2006, GB / T 2811-2007
Technical Parameters for Impact Test
Attributes:
Power electronic
Warranty 1 year
Model HZ-8101B
Tester Standard GB / T 2812-2006, GB / T 2811-2007
Impact Hammer 5 ± 0.1kg
Impact Hammer Diameter 96mm
Puncturing Hammer 3 ± 0.5kg
Length of the Puncturing Hammer 40mm
Puncturing Hammer Diameter 28mm
Hardness of the Puncturing Hammer HRC45
Force Transducer Measuring Range 0- 20KN Drop Height 1000mm Display LED Indicator 20KN
Drop height 1000mm
Display LED digital display
Technical Parameters for Penetration Test
1. Weight of the penetration hammer: 3.0 + 0.05kg
2. Angle of the tip of the penetration hammer: 60±0.5°
3. Minimum length of the tip of the penetration hammer: 40mm
4. Hardness: 50 to 45HRC
5. Penetration height: 1000±5mm
Send product request
Other supplier products
 |
Dry and Wet Retroreflectometer | Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us... |
 |
Initial Adhesion Tester | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
Textile Fabric Steam Shrinkage Tester | Testing Standards: ISO 3005:A standard method for determining dimensional changes in fabrics caused by loose steaming, applicable to woven fabri... |
 |
Building material burning tester | Technical specifications: TheBuilding material burning testeris designed and manufactured according to the standard gb8626-88 and is used to deter... |
 |
Paper thickness tester | Product Introduction: Paper thickness tester is suitable for measuring the thickness of various paper （including toilet paper）， cardboard, corruga... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
