Motorcycle Helmet Sand Drop Tester
Main application
Helmet abrasion resistance sand test machine is mainly used to test motorcycle helmets, sports helmets, electric vehicle helmets, fire helmets, rescue helmets, military and police helmets, pilot helmets and other helmets eye protection performance. Widely used in a variety of helmets related to the production of research and development, scientific research, quality supervision and testing, colleges and universities laboratories and other units.
Functional characteristics
1、The speed regulator can carry out the adjustment of the sample speed, and real-time display.
2、Sand fall gravity tube has three sections of PVC, acrylic or stainless steel tube.
3、Conical sand drop storage port, easy to store the sand drop.
4、The conical design structure at the bottom of the equipment and the low falling disk are convenient to collect the falling sand.
Reference standards
GB811-2022.
GB24429
GB/T 38305
GJB1564A
GA/T44. GA293
GA294
GA295
GA296
ASTMD968
ASTMD333
ASTMD1395
ASTMD2205
Main Technical Parameters
1. sand drop tube: height 1650±10mm, material PVC, acrylic or stainless steel.
2. specimen turntable: tilt angle 0-90 ° adjustable. The standard angle of 45 ± 3 °.
3. turntable speed: 0-300r/min, adjustable. The standard speed 250±10r/min.
4. falling sand specifications: particle size of 0.5-0.7mm, the material is natural quartz sand, weight 3 ± 0.1kg (reuse no more than 10 times).
5、Fallen sand form: gravity free fall.
Send product request
Other supplier products
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Car seat static strength tester | Applicable standards: GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test r... |
 |
Wet leakage current test system of photovoltaic module | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
 |
Initial Adhesion Tester | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
Paper thickness tester | Product Introduction: Paper thickness tester is suitable for measuring the thickness of various paper （including toilet paper）， cardboard, corruga... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
