.

Solid Combustion Rate Tester

Product Introduction

This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test N.1: Test Method for Flammable Solids issued by the United Nations, GB/T 21618 - 2008 Test Method for Burning Rate of Flammable Solids in Dangerous Goods, and NY/T 1860.15 - 2010 *Guidelines for Physicochemical Property Testing of Agricultural Chemicals - Part 15: Solid Flammability.

Product Features

Technical parameters

Operating environment

(5~40)°C, <85%RH

Ignition source temperature

≥1000°C

Ignition method

Gas igniter with nitrogen-silicon rod

Combustion detection stroke

(0~250)mm

Combustion distance measurement accuracy

±0.5mm

Timing range

5min (non-metallic); 20min (metallic)

Timing display resolution

Pile stack mold

Triangular-shaped molds 260mm long, 20mm wide, profiled to an inner height of 10mm

Burner plate

Flat plate made of corundum mullite, impervious to penetration, non-combustible, and with low thermal conductivity


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Image test standard transmission light box meter
Image test standard transmission light box meter Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art...
Metal ring friction and wear testing machine
Metal ring friction and wear testing machine Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa...
Geomembrane Environmental Stress Cracking Resistance Tester
Geomembrane Environmental Stress Cracking Resistance Tester Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin...
Mask Bacterial Filtration Efficiency Test Machine (BFE)
Mask Bacterial Filtration Efficiency Test Machine (BFE) Standards YY0469-2004. YY/T 0969-2013. ASTMF2100. ASTMF2101. EN14683 ect. Features 1.1、Standard test cabinet, touch screen + PLC system is easy to ...
Fiber Blend Ratio Tester
Fiber Blend Ratio Tester Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp...
All supplier products

Same products

Gas Oxidizing Property Tester
Gas Oxidizing Property Tester Seller: Standard International Group (HK) Limited Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
Battery Powder Compaction Density Measurement System
Battery Powder Compaction Density Measurement System Seller: Standard International Group (HK) Limited The Battery Powder Compaction Density Measurement System is a precision testing system designed...
Battery Powder resistance tester
Battery Powder resistance tester Seller: Standard International Group (HK) Limited The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
KES-SESRU surface roughness/friction tester
KES-SESRU surface roughness/friction tester Seller: Standard International Group (HK) Limited TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...