Qinsun UV-master
In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.
UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc
Standards:
ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Technical parameters:
1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.
Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.
2. Sample size: 48 standard samples of75 * 150mmcan be placed;
3. Sample thickness: The sample thickness shall not exceed 10mm
4. UV wavelength:UVA-340
5. Simulated condensation: The condensation system time can be adjusted
6. Test time: adjustable from0 to 9999
7. Irradiance: adjustable from0 to 1.6w/m2
8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors
9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed
10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input
11. UV state, no water, operable
12. Sample space: Large sample space, can be equipped with 3D sample racks
13. Experimental status data can be transmitted through Ethernet cables
14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours
15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Send product request
Other supplier products
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Carbon Black Content Tester | Standards GB/T 2951.41-2008: Test methods for cable and optical fiber insulating/sheathing materials. GB/T 3515-2005: Pyrolysis method for carb... |
 |
Electrochemical Corrosion and Wear Testing Machine | Electrochemical corrosion and wear testing machines are widely used in materials science, mechanical engineering, electronic engineering, aerospace... |
 |
Bundesmann Rain Tester丨Bundesmann Rain Test machine | Introduction The device is a practical test method for rainfall, applicable to clothing products, including waterproof cloth. It is used for mea... |
 |
Mattress Durability Fatigue Test device | Product Description Mattress durability testing machine. This test is mainly used to evaluate the resistance to fatigue pressure and surface wear ... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
