High Low Temperature Test Chamber
Features and Benefits
1.Adopt advanced temperature control system, the controller according to the feedback signal accurately regulate the cooling and heating system, so that the temperature is kept within the set range.
2.The temperature range of the high and low temperature test chamber is from -70 ° C to 150 ° C (higher and lower temperatures can be customized), which can meet the requirements of high and low temperature environment simulation.
3.Through reasonable design of air duct and circulation system, the temperature inside thechambercan be evenly distributed,the temperature uniformity ≤2℃.
4.The user can set the temperature curve, the number of cycles, the holding time and other parameters in advance to achieve automatic testing, improve the test efficiency and repeatability.
Specifications
Model |
STD TR5-100 |
STD TR5-225 |
STD TR5-500 |
STD TR5-1000 |
Internal Dimension (mm) |
400*500*500 |
500*600*750 |
700*800*900 |
1000*1000*1000 |
Overall Dimension (mm) |
900*1050*1620 |
1000*1140*1870 |
1200*1340*2020 |
1500*1540*2140 |
Interior Volume |
100L |
225L |
500L |
1000L |
Heat load |
1000W |
|||
Temperature Range |
A : -20℃~+150 ℃ B : -40℃~+150 ℃ C: -70℃~+150 ℃ |
|||
Temperature Fluctuation |
± 0.5 ℃ |
|||
Temperature Deviation |
± 2.0 ℃ |
|||
Humidity Range |
20% ~ 98% RH |
|||
Humidity Deviation |
± 2.5% RH |
|||
Cooling Rate |
5 ℃ / min |
|||
Heating Rate |
5 ℃ / min |
|||
Controller |
Programmable color LCD touch screen controller,PC Link, R-232 interface |
|||
Temperature Sensor |
PTR Platinum Resistance PT100Ω/MV A-class |
|||
Humidity sensor |
Dry and wet bulb sensor |
|||
Heater |
Nichrome heater |
|||
Cooling system |
Mechanical compression refrigeration system |
|||
Refrigerating unit |
French TECUMSEH compressor |
|||
Refrigerant |
Environmentally friendly refrigerant |
|||
Humidifier |
External isolation, stainless steel surface evaporation humidifier |
|||
Dehumidification system |
Evaporator |
|||
Air circulation |
Centrifugal wind fan |
|||
Water supply system |
Automatic water supply; Water purification system |
|||
Safety device |
Humidifier dry-combustion protection; over-temperature protection; over-current protection; Refrigerant high-pressure protection; Water shortage protection, Earth leakage protection; |
|||
Exterior material |
Steel Plate with protective coating |
|||
Thermal insulation |
Polyurethane foam |
|||
Observation window |
Interior lighting , double-layer thermo stability silicone rubber sealing |
|||
Standard configuration |
1 Cable hole (Φ 50.) with plug; 2 shelves |
|||
Timing Function |
0.1~999.9 (S,M,H) settable |
|||
Send product request
Other supplier products
| Rubber Mooney Viscosity Measuring Instrument (for Rubber Mooney Viscosity Tester) | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... | |
| Bubble Leak Tester | The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for the quantitative measurement of sealing strength, heat se... | |
| Car Crash Test Dummies(Hybrid iii Dummys) - Female/Male | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Mixed Type III Crash Test Dummy - Adult Male 50th Percentile is widely use... | |
| Coatings Shear tester | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... | |
| Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec... |
Same products
| Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... | |
| Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... | |
| MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... | |
| MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... | |
| Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
















