Hot Cold Chamber
Features and Benefits
1.Hotcoldchambercan range from very low temperatures ( -70 ° C or lower) to high temperatures (+180 ° C or higher) to simulate a variety of extreme environments.
2.The internal temperature field is uniform, so that the sample is heated or cooled to a similar degree in temperature control chamber.
3.Precise temperature control and uniformity ensure reliable and repeatable test results, providing a strong basis for product improvement.
4.Hotcoldchambercan highly simulate the alternating cold and hot environment that the product may encounter in actual use, such as the working condition of electronic products in desert high temperature and polar low temperature.
Specifications
Model |
STD T-100 |
STD T-225 |
STD T-500 |
STD T-1000 |
Internal Dimension (mm) |
400*500*500 |
500*600*750 |
700*800*900 |
1000*1000*1000 |
Overall Dimension (mm) |
900*1050*1620 |
1000*1140*1870 |
1200*1340*2020 |
1500*1540*2140 |
Interior Volume |
100L |
225L |
500L |
1000L |
Heat load |
1000W |
|||
Temperature Range |
A : -20℃～+150 ℃ B : -40℃～+150 ℃ C: -70℃～+150 ℃ |
|||
Temperature Fluctuation |
± 0.5 ℃ |
|||
Temperature Deviation |
± 2.0 ℃ |
|||
Cooling Rate |
1 ℃ / min |
|||
Heating Rate |
3 ℃ / min |
|||
Cooling system |
Mechanical compression refrigeration system |
|||
Refrigerating unit |
French TECUMSEH compressor |
|||
Heating Element |
Nichrome heater |
|||
Controller |
Programmable color LCD touch screen controller, Ethernet connection |
|||
Water supply system |
Automatic water supply, Water purification system |
|||
Safety Device |
Over-temperature protection;Over-current protection; Refrigerant high-pressure protection; Earth leakage protection |
|||
Send product request
Other supplier products
 |
Strength Tester for Lead - end of Photovoltaic Modules | The Strength Tester for Lead-End of Photovoltaic Modules is designed to evaluate the mechanical integrity and tensile strength of PV module connect... |
 |
Reciprocating Friction and Wear Test Machine | Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to... |
 |
Enamel Boiling Water Resistance meter | Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287... |
 |
Syringe needle flow tester | The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a spe... |
 |
Solid Material Burning Rate Analyzer | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
