Carpet Dynamic Load Tester
Compliance Standards
ISO 2094: 1999 (BS)
QB/T 1091-2001
ASTM D3574 TEST I4
Instrument Features
Provide information on the reduction in the thickness of carpet pile Imitate the pressure and shearing effects generated by walking Adopt British and international standard testing methods
Product Details
This instrument is also known as a dynamic load machine. It provides information on the reduction in the thickness of carpet pile by imitating the shearing effects of two actions: the pressure during walking and that from the edges of shoes.
Testing Method
The load has two rectangular steel feet with dimensions of 51 mm×6.3 mm and a height of 9.5 mm. The load is lifted by a cam through a cantilever mounted on a pivot and is made to perform a free - fall motion at a controllable height above the carpet sample every five seconds. The steel plate holding the sample moves slowly and continuously back and forth so that the metal plate moves 3.2 mm each time the load falls. There is a semi - overlapping area for each impact. Twenty - five impacts form a complete back - and - forth movement, creating a stressed area that is 90 mm long and 50 mm wide.
Technical Parameters
Dimensions: W500 mm, D500 mm, H370 mm Power Consumption: 250 W
Send product request
Other supplier products
 |
Carpet Static Electricity Tester | Test Principle When a person walks on the inspected carpet wearing the shoes specified in the standard and following the prescribed walking patter... |
 |
Flooring Materials Abrasion Resistance Tester | Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics-Coated Fabrics - Abrasion Resistance) EN 660-2(Abrasio... |
 |
Plastic Friction and Wear Tester | Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b... |
 |
Scratch tester STD-KK02 | Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
