Vehicle Cabin Air Filter Tester

The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters used in automobiles. It measures particulate matter filtration efficiency, pressure drop, and dust holding capacity, providing accurate and repeatable data essential for product development, quality control, and regulatory compliance. The tester combines advanced aerosol generation, dust dispersion, and particle counting systems to simulate real-world operating conditions and capture reliable performance indicators.

Application

This tester is widely used in automotive R&D centers, filter manufacturing facilities, quality control laboratories, and third-party testing institutions. It is suitable for testing cabin air filters of passenger vehicles, commercial vehicles, buses, and specialized transport equipment. The instrument evaluates filter performance under controlled airflow, particle loading, and environmental conditions, providing insights into efficiency, airflow resistance, and dust holding capacity. It supports product validation, development of high-efficiency filters, compliance verification with international standards, and routine quality assurance in production lines.

Standards

The Vehicle Cabin Air Filter Tester is designed in accordance with the following standards:

(1) DIN 71460-1: Road vehicles – Air filters for passenger compartments of motor vehicles – Part 1: particulate matter filtration tests

(2) ISO/TS 11155-1: Road vehicles – Air filters for occupants’ compartments – Part 1: particulate filtration test

(3) GB/T 14295-2019: Automotive air filter performance testing

(4) GB/T 13554-2020: Road vehicle air filter testing methodology

Product Features

(1) Generates and controls airflow rates from 70 to 700 m³/h to simulate real operating conditions.

(2) Accurately measures pressure drop across the filter from 0 to 1000 Pa.

(3) Provides a filter adapter to securely mount filters up to 300 × 600 mm in size.

(4) Standardized test section of 180 cm² ensures consistent airflow distribution.

(5) Integrated environmental sensors continuously monitor temperature, relative humidity, and atmospheric pressure.

(6) Dust disperser (SAG 410/L) delivers controlled dust load from 2 to 245 g/h.

(7) Aerosol generator (ATM 220) produces test aerosols for precise performance evaluation.

(8) Electrostatic neutralizer (EAN 581) removes charges from aerosols to ensure measurement accuracy.

(9) High-precision particle counter (TOPAS spectrometer LAP321) measures particle size and concentration.

(10) Automated control and data acquisition system supports test sequences, real-time monitoring, and reporting.

Technical Parameters

Parameter	Specification
Air Flow Rate	70–700 m³/h
Pressure Difference	0–1000 Pa
Filter Adapter Size	300 × 600 mm
Test Section Cross-Section	180 cm²
Environmental Sensors	Temperature, Relative Humidity, Atmospheric Pressure
Dust Disperser	SAG 410/L (2–245 g/h)
Aerosol Generator	ATM 220
Electrostatic Neutralizer	EAN 581
Particle Measurement	Laser aerosols, TOPAS spectrometer LAP321
Power Supply	400 V AC, 16 A
Test Bench Dimensions	460 × 120 × 340 cm (L × W × H)

Accessories

(1) Dust disperser SAG 410/L

(2) Aerosol generator ATM 220

(3) Electrostatic neutralizer EAN 581

(4) TOPAS spectrometer LAP321 particle counter

(5) Filter adapters of various sizes

(6) Environmental monitoring sensors

Operation and Maintenance

(1) Install the filter securely on the adapter and ensure proper sealing.

(2) Set airflow, dust load, and test duration according to test requirements.

(3) Start the test bench and monitor environmental conditions in real-time.

(4) After completion, record efficiency, pressure drop, and dust holding capacity results.

(5) Clean the dust disperser, aerosol generator, and filter housing regularly to maintain accuracy.

(6) Calibrate particle counters and sensors periodically to ensure compliance with international standards.

Other supplier products

	Automatic freezing point pour point cold tester	The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other fields, and is used to a...
	Foam Repeated Compression Tester	Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing m...
	Walk-in High-Temperature Aging Chamber,walk in stability chamber	Applications Walk-in High-Temperature Aging Chambers are typically assembled on-site using insulated panels (double-sided color steel sheets with ...
	Micro-hole Detection Instrument	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials. The following is a detail...
	Catheter Flow Meter	The Catheter Flow Meter is specifically designed for measuring the water flow rate of medical catheters, including non-vascular catheters, intravas...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...