Waterproof socks testing machine
The Waterproof Socks Testing Machine is designed to evaluate the water resistance and waterproof performance of socks, shoes, and shoe linings made of rubber or water-permeable fabrics. The device provides accurate and reproducible results to ensure compliance with product quality standards.
Application
This instrument is widely used in quality control, research, and product development, including:
(1) Testing waterproof socks and stockings for outdoor and sports applications.
(2) Evaluating rubber shoes and shoe linings for water resistance.
(3) Assessing moisture-proof shoe covers made of permeable fabrics.
(4) Research and development of waterproof textiles and shoe materials.
(5) Ensuring consistency of manufactured waterproof footwear before market release.
Standards
The device is designed to comply with:
(1) HG/T 3664: Standard for Shoes Water Penetration Test (China)
(2) ASTM F1670/F1671: Standard Test Methods for Resistance of Materials to Synthetic Blood Penetration (optional for extended applications)
(3) ISO 20344: Personal Protective Footwear – Test Methods (for extended footwear testing)
Features
(1) Tests waterproof performance of socks, shoes, and shoe linings effectively.
(2) Double test positions improve testing efficiency.
(3) Fixtures made from aluminum and stainless steel prevent corrosion and ensure durability.
(4) DC 24V safe voltage operation for enhanced user safety.
(5) Precise pressure regulation for consistent and accurate testing.
(6) Integrated timing system ensures repeatable test cycles.
Parameters
| Parameter | Specification |
|---|---|
| Power supply | AC 220V, 50/60 Hz |
| Power consumption | 300 W |
| Motor power | 8/1 × 2 HP |
| Inflation pressure gauge | 2 kg |
| Table size | 1050 × 540 mm |
| Packing size | 1260 × 650 × 1720 mm |
| Net weight | 150 kg |
| Gross weight | 220 kg |
Accessories
(1) Main test unit – 1 set
(2) Double-position fixtures – 1 set
(3) Instruction manual – 1 set
(4) Power cable – 1 piece
Test Procedures
(1) Mount the socks, shoes, or shoe lining samples securely on the test fixtures.
(2) Set the inflation pressure to the required test value (up to 2 kg).
(3) Initiate the test cycle. Water will be applied to the sample to evaluate waterproof performance.
(4) Monitor the test timing and pressure to ensure consistency.
(5) Record the result to determine whether the sample meets waterproof standards.
Maintenance Information
(1) Regularly clean the fixtures and table surface to avoid water scale buildup.
(2) Inspect the inflation system and pressure gauge for accuracy.
(3) Check motors and electrical connections for wear or damage.
(4) Use only clean water to prevent corrosion of internal components.
(5) Follow safety protocols when operating electrical and pneumatic systems.
Send product request
Other supplier products
 |
Prefilled Syringe Plunger Force Tester | The Push - force Tester for Prefilled Syringes is widely used in the medical device industry, mainly for testing the push - force performance of pr... |
 |
Face Mask Tensile Tester | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Melt Mass-Flow Rate Test Machine, ASTM D1238-98 | Introduction: This machine is deisgned according to ISO1133. ASTM D1238-98 ,ISO1133; Melt flow rate was measured using automatic sampling, weigh... |
 |
Weatherometer Laboratory Testing Equipment(UV) | Features and Benefits 1. UVA-340. UVB-313 and other UV lamps, a single power of 40 watts, can accurately control the irradiation intensity of 0.... |
 |
Chest Drainage Tester | The thoracic drainage tester is widely applied in the medical field, mainly used for monitoring and evaluating the performance of thoracic drainage... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
