Button Impact Machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.

Application

Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.

Standards

ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).

Features

1. Ensure the vertical alignment of tension;

2. Fixed button edge without affecting its adhesion;

3. Consistent force of 10s continuously;

4. Elevate and fix the position of the test meter through the handle, easy to change samples

5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;

6. Safety buckle design makes operation more secure and reliable;

7. The long machine frame can extend the test scope more widely;

8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;

9. Can reduce the damage caused by slid leakage during test process;

10. Simple design and accurate test results.

Parameter

Parameter	Specification
Operating Mode	Manual
Impact Head Weight	0.84kg
Impact Height	32mm, 44mm, 67mm, 83mm, 95mm, 117mm
Body Material	Stainless Steel / Brushed Finish
Instrument Weight	5kg
Power Supply	No (Manual Operation)
Appearance Size	100mm (L) × 150mm (W) × 300mm (H)

Accessoriess

The accessories for push-button impact drills (often referring to impact drills or similar equipment) mainly include the following types, each serving a different function to ensure the normal operation of the equipment:

Switch accessories: such as impact drill switches and gear selector switches, used to control the start, stop, and gear switching of the equipment, are key components for operating the push-button impact drill.

Transmission and impact components: including motors, shafts, sleeves, ratchet mechanisms, etc. These components work together to convert electrical energy into mechanical energy to achieve the impact function. For example, the motor drives the shaft to rotate, the shaft drives the sleeve and ratchet mechanism to move, thereby generating impact force.

Drill bits and chucks: The drill bit is the component that directly performs the drilling operation, while the chuck is used to fix the drill bit and ensure its stable operation. Different specifications and types of drill bits can be replaced according to the operation requirements.

Protective and auxiliary accessories: such as dust covers and limit ropes. Dust covers prevent dust generated during drilling from entering the equipment and protect it from damage; limit ropes are used to control the range of motion of the impact components and prevent them from separating from the main body of the equipment.

Battery and charger (for electric models): Provides power to the electric push-button impactor, ensuring continuous operation. Battery capacity and performance directly affect the device's runtime and efficiency.

Test Procedures

The operation of a button impact tester includes the following steps:

Confirm that the impact testing machine is connected correctly and the power supply is stable.

Prepare the impact specimen and confirm that its size, shape, and surface condition meet the test requirements.

Confirm that the ambient temperature and humidity meet the test standard requirements.

Wear appropriate protective equipment, such as safety glasses and gloves.

Turn on the power to the impact testing machine and start the operating system.

Place the impact specimen on the worktable of the impact testing machine, ensuring the specimen is stable.

Set the impact test parameters, such as impact energy and impact velocity.

Start the impact test program and begin the impact test.

Observe the changes in the impact specimen and record the impact test data.

After the impact test, turn off the impact testing machine and organize the test data.

During operation, always pay attention to safety precautions and perform regular maintenance and upkeep on the equipment to ensure its normal operation.

Other supplier products

	ISO certified Mechanical load testing machine for photovoltaic modules	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mechanical Load Testing Machine is a precision instrument designed to eva...
	FPC Flex Durability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioni...
	Advanced Contamination Sensitivity Evaluation Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Hydraulic Pump Contamination Resistance Tester is primarily used to test ...
	UV Lamp Aging Test Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D4329 Standard Practice for Fluorescent UV Exposure of Plastics ASTM D4587...
	Humidity heat chamber for pv modules	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Heat Test Chamber is suitable for: Damp-heat performance testing of ...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...