Glass Scratch/Abrasion Tester
The Glass Scratch/Abrasion Tester is used to test the scratch and abrasion resistance of glass. This instrument uses a counter to set the number of rubbing cycles and a speed controller to adjust the operating speed of the rubbing head to meet the customer's actual testing needs. During the test, a 10mm*10mm rubbing head equipped with steel wool is used. Adjustable weights adjust the pressure load of the rubbing head to rub the glass. After the test, the sample is removed and its scratch and abrasion resistance is evaluated.
Applications
Automotive Glass: Assesses windshield durability against environmental wear.
Consumer Electronics: Tests smart screens, tablet covers, and display panels.
Architectural Glass: Validates window and facade materials for long-term performance.
Medical Devices: Ensures compliance with biocompatibility standards (e.g., ISO 10993-7).
Standards
ISO 10993-7: Biological Evaluation of Medical Devices – Ethylene Oxide Sterilization Residuals
USP (United States Pharmacopeia): Container Performance Testing
Ph. Eur. (European Pharmacopoeia): Glass Containers for Pharmaceutical Use
JP (Japanese Pharmacopoeia): Glass Container Testing Standards
GB/T 16886.7: Biological Evaluation of Medical Devices – Ethylene Oxide Sterilization Validation
Features
Three Independent Workstations: Enables parallel testing of diverse glass types.
Adjustable Friction Head: 10mm × 10mm steel wool attachment with load regulation (0–10N).
Speed Governor: Controls reciprocating motion (50 ±5 mm stroke) up to 120 RPM.
Safety Interlocks: Prevents accidental start-up and overload damage.
Easy Sample Handling: Quick-release clamps for rapid sample exchange.
Digital Display: Monitors test parameters (load, speed, cycles) in real time.
Technical Parameters
| Parameter | Specification |
|---|---|
| Control Mode | Automatic (PLC) |
| Maximum Load | 10 N (Adjustable) |
| Speed Range | 0–120 RPM (Reciprocating) |
| Stroke Length | 50 ±5 mm |
| Workstations | 3 (Independent) |
| Friction Head Size | 10 mm × 10 mm (Steel Wool Attachment) |
| Power Supply | AC 220V ±10%, 50Hz |
| Dimensions (L×W×H) | 800 mm × 400 mm × 500 mm |
| Net Weight | 85 kg |
| Display | LED Touchscreen (Load/Speed/Cycle Control) |
Test Procedures
Place the cut sample on the sample clamping platform and clamp it securely.
Fix the weights, ensuring full contact between the friction head and the sample, and tighten the device.
Turn on the machine and select the desired test mode (specified number of times or continuous operation). Then set the desired number of friction cycles and the desired operating speed.
Turn on the speed controller switch and press the start button; the equipment will begin operation.
After the test, record the surface friction of the sample and assign a relevant rating.
Send product request
Other supplier products
 |
Smoke Density Chamber (Horizontal Test),Smoke density evaluation device,ISO 5659 | The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiati... |
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K735... |
 |
Coating thickness gauge/film thickness gauge | Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel... |
 |
Carpet Dynamic Load Tester | Compliance Standards ISO 2094: 1999 (BS) QB/T 1091-2001 ASTM D3574 TEST I4 Instrument Features Provide information on the reduction in the thi... |
 |
Micro Controll Four-ball Friction Tester | The microcomputer-controlled four-ball friction testing machine uses a sliding friction method under point contact pressure conditions at the extre... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
