Wire Torsion and Winding Tester

The Wire Torsion and Winding Tester is a versatile instrument designed to perform both torsion and winding tests on metal wires. It evaluates the mechanical properties, formability, and ductility of wires, providing essential data for quality control, research, and production optimization. This tester is widely used in aerospace, metal material processing, tire manufacturing, as well as in universities, scientific research institutions, technical supervision, and quality inspection departments.

Application

(1) Torsion and winding performance testing of metal wires.

(2) Evaluating wire formability, elasticity, and torsional resistance.

(3) Quality control in wire production and processing.

(4) Research and development of aerospace wires, steel wires, and conductive wires.

(5) Testing wires used in automotive, construction, and industrial equipment.

(6) Laboratory experiments and materials research in universities and technical institutes.

Standards

(1) GB/T 2611-2007 – Testing Machine General Technical Requirements.

(2) ISO 7800:1984 – Test Method for Unidirectional Torsion of Metal Wires.

(3) ISO 9649:1990 – Test Method for Bidirectional Torsion of Metal Wires.

(4) GB/T 3428-2002 – Zinc-Coated Steel Wire for Overhead Stranded Wire: Winding Test – Torsion Test.

(5) GB/T 239-1999 – Torsion Test of Metal Wire.

(6) GB/T 2979-2020 – Metal Materials Wire Winding Test Method.

(7) ASTM and JIS standards related to torsion and winding testing of metallic materials.

Features

(1) Dual functionality: performs both torsion and winding tests on a single machine.

(2) Provides comprehensive evaluation of wire mechanical properties.

(3) Compliant with multiple national and international standards.

(4) Streamlined testing process, improving efficiency compared to separate machines.

(5) Controlled testing parameters for repeatable and reliable results.

(6) Supports quality assurance in production and R&D applications.

(7) Adjustable sample setup to accommodate various wire diameters and lengths.

Parameters

Parameter	Specification
Torsion sample size	Diameter 1–10 mm
Winding sample size	Diameter 1–6 mm
Distance between two plus heads	0–500 mm, adjustable
Twisting/Winding speed	0–2.0 r/s, adjustable, error <±10%
Power supply	AC 220V ±10%, 50 Hz

Accessories

(1) Main testing machine

(2) Sample holders for torsion and winding tests

(3) Adjustable clamps and positioning rods

(4) Power cable

(5) User manual

Test Procedures

(1) Secure the wire sample in the torsion or winding fixture.

(2) Adjust the distance between the two heads according to the sample length.

(3) Set the desired twisting or winding speed.

(4) Start the machine to perform torsion or winding cycles.

(5) Observe the wire performance during testing.

(6) Record results and repeat for additional samples if necessary.

Maintenance Information

(1) Regularly inspect clamps, heads, and moving parts for wear or damage.

(2) Ensure the machine is clean and free from debris.

(3) Check power supply and electrical connections for stability.

(4) Lubricate moving components according to manufacturer recommendations.

(5) Handle the sample fixtures and torsion/winding heads carefully to avoid misalignment.

(6) Calibrate the machine periodically to maintain measurement accuracy.

Other supplier products

	Falling Ball Impact Resistance Testing Machine	Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials...
	Medical needle toughness tester	The Medical Needle Toughness Tester is designed to evaluate the mechanical strength and flexibility of medical needles under bending stress. It fea...
	Spectrodensitometer	Standard The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan...
	Geomembrane Fracture Resistance Tester	Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes to Slow Steady-State Strain) ISO 17548(Geosynthetics - ...
	Digital Pneumatic Stiffness Tester/Stiffness Tester Pneumatic	A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter orifice for a distance of 57 mm (2.25 in) in 1.7 seconds...

All supplier products

Same products

	Gas Oxidizing Property Tester	Seller: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Seller: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Seller: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Seller: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...