Bag Plastic Buckle Durability Tester
It is mainly used to test the service life of plastic plug-ins in luggage accessories.
Applications
This machine simulates the use of plastic clasp under reciprocating open and close movement to a specified number of times at a certain frequency. And testing the quality of plastic clasps for luggage and clothing.
Standards
QBT 5247-2018:Hardware fitting of case and bag-Test method for durability of plastic buckle
Features
1. We have a strong after-sales service team;
2. We can handle various problems promptly and efficiently, relieving our customers of any worries;
3. We have a complete range of spare parts, eliminating the hassle of long lead times for ordering parts;
4. We keep up with industry standard updates and provide testing instruments that meet the latest standards in a timely manner.
Technical Parameters
| Parameter | Specification |
|---|---|
| Control System | PLC+ Touch Screen (Man-machine interface control system with easy operation and power-off saving function) |
| Counting | 0——999 999 times, automatic stop function when reaches set amount and setting the insertion and extraction times functions in the man-machine interface |
| Drive Motor | High precision servo motor control, stable speed, lower noise, long life span. The right fixture seat can be controlled to left and right movement and positioning speed and angle is accurate than ordinary cylinder |
| Frequency of the Right Clamp | 25±1/ min |
| Open and Close Cylinders | 2 yadeke cylinders |
| Cushion Hydraulic Cylinder | 2 |
| The Right & Left Clamps | Convenient to adjust the samples under different position. This structure adopts a combination of mechanical and pneumatic design |
| Air Supply | exceeding 6kg/cm² |
| Servo Motor | 400w |
| Power Supply | Single phase, AC220V, 50/60HZ |
Accessoriess
It consists of two sets of sample clamps, left and right. The left sample clamp fixes the upper part of the connector and can periodically press the locking mechanism of the connector (left and right locking or up and down locking); the right sample clamp cooperates with the left one to make the upper and lower parts of the connector move horizontally back and forth, with adjustable movement frequency.
1. Counter: Records the number of opening and closing cycles; one opening and closing cycle counts as one time.
2. Control device: It has an automatic stop function in case of sample abnormality during the test and also has a memory function.
Test Procedures
To ensure the long-term stable operation of the testing machine, the following maintenance procedures should be performed regularly:
1. Accuracy Calibration
Calibrate the equipment annually using calibration weights and a torque wrench, keeping the error within 3%.
2. Cleaning and Maintenance
Cover the machine with a dust cover after each use, regularly clean dust from the drive bearings and guide rails, and perform lubrication maintenance every 9 million cycles.
3. Fixture Replacement
For recycled plastics containing additives or high-temperature flame-retardant materials, calibrate the parameters separately and replace with suitable fixtures.
4. Safety Protection
Ensure the equipment is properly grounded, avoid direct exposure of antibacterial components to ultraviolet light, and prevent changes in material properties from affecting test results.
Send product request
Other supplier products
 |
Diaper impurity testing machine | The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual... |
 |
Film Heat Shrinkage Tester | The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio... |
 |
Cut Susceptibility Tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules and... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
 |
Bending Tester STD- FB2 - S | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
