Incline Impact Tester
The Incline Impact Tester is designed to evaluate the impact resistance of products, packaging, and transport systems under controlled oblique loading conditions. It simulates real-world drop, collision, and tilt scenarios, providing quantitative assessment of structural integrity, energy absorption, and deformation for a wide range of consumer, industrial, and automotive components.
Application
(1) Packaging drop and transport impact testing
(2) Consumer goods durability evaluation under oblique impact
(3) Industrial machinery and palletized freight crash simulation
(4) Automotive component oblique load testing
(5) Quality control in logistics and manufacturing
(6) Material and design validation for R&D laboratories
Standards
(1) ASTM D7748 – Impact resistance testing of packaging and transport systems
(2) ISO 13355 – Automotive component durability evaluation under oblique load conditions
(3) ISTA 3E – Simulates truck collision scenarios for palletized freight testing
Features
(1) Rapid Precision Deployment: Pneumatic positioning system with <0.1 mm repeatability and tool-free impact speed adjustment.
(2) Modular Impact Configuration: Multiple load capacities (1,000–10,000 lbs) and scalable collision surfaces for various product sizes.
(3) Advanced Data Acquisition: High-speed 4-channel TLP system with laser velocimetry for peak force and deformation capture.
(4) Ergonomic Workflow: Low-profile sled and self-centering guides for repeatable impact angles and easy specimen handling.
(5) Industrial Durability: Hardened steel AR500-grade collision plates and IP67-rated sealed drive system for long-term reliability.
(6) Safety Systems: Enclosure interlocks, laser safety curtains, and overload protection to prevent operator hazards.
Parameters
| Model | Load Capacity | Collision Surface | Sled Size | Max Speed | Simulated Drop Height |
|---|---|---|---|---|---|
| Ⅱ1000 | 1,000 lbs | 60” × 60” | 48” × 48” | 8 ft/sec | 18” |
| Ⅱ2000 | 2,000 lbs | 72” × 72” | 60” × 60” | 8 ft/sec | 18” |
| Ⅱ4000 | 4,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ6000 | 6,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ8000 | 8,000 lbs | 84” × 84” | 72” × 72” | 8 ft/sec | 18” |
| Ⅱ10000 | 10,000 lbs | 96” × 96” | 84” × 84” | 8 ft/sec | 18” |
Accessories
(1) Collision Surface Upgrades: AR600 steel targets, replaceable rubber bumpers
(2) Software Add-Ons: CrashView Pro™ (high-speed video up to 10,000 fps), Cloud Safety remote monitoring
(3) Calibration Services: Annual NVLAP-accredited velocity calibration, accelerometer cross-axis testing
(4) Safety Upgrades: Explosion-proof enclosure, seismic-rated anchoring system
(5) Consumables: High-temperature lubricant for linear bearings, replacement laser sensor covers
Test Procedures
(1) Secure the specimen onto the sled or collision surface using appropriate clamps.
(2) Select load capacity, impact speed, and oblique angle via touchscreen interface.
(3) Initiate pneumatic launcher and monitor real-time force, velocity, and deformation data.
(4) Capture post-impact data and high-speed video for analysis.
(5) Repeat for additional test conditions or specimens as required.
Maintenance Information
(1) Inspect pneumatic components, sled rails, and collision plates regularly for wear.
(2) Clean laser sensors, sled guides, and collision surfaces after each test series.
(3) Verify calibration of velocimetry and accelerometer sensors at scheduled intervals.
(4) Lubricate moving components with high-temperature lubricant.
(5) Store in a dry environment to prevent corrosion and maintain measurement accuracy.
Send product request
Other supplier products
 |
Xenon Arc Weather Ometer SI4000 | SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for testing the agin... |
 |
Socks wear tester | Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor... |
 |
High and Low Temperature Humidity Test Chamber,IEC 62660 | Applications High and Low Temperature Humidity Test Chamber is designed for performance and reliability testing of electric vehicle power batterie... |
 |
Enamel Boiling Water Resistance Tester | The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions... |
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
