Building material burning performance tester

• 

According to GB / T8626. ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.

Building material burning performance testing machine meet the standards: EN ISO 11925-2. DIN 53438. DIN4102-1. GB / T 8626 and other standards.

Technical parameters:

1. stainless steel structure box;

2. the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;

3. the flame height adjustable, automatic ignition;

4. the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;

5. gas pressure: 10KPa-50 KPa;

6. burning angle: 0 ° (vertical), 45 °

7. through the chassis outside the debug handle, the burner can move in the horizontal direction;

8. tempered glass door easy to observe the test;

9. stainless steel sample holder and sample template;

10. equipped with two kinds of stainless steel sample clip.Flame height gauge;

11. a high degree of experimental automation, experimental data accurate, easy to operate;

Control system:

1. programmable controller (PLC) control:

2. automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;

3. optional automatic detection of wind speed, 6 samples of experimental data preservation;

4. the text display display;

5. real-time monitoring of experimental data, query 6 experimental data, query the alarm content.

6. the experimental abnormal sound alarm.

Other supplier products

	Resistance to flame propagation tester,ECE R118 Annex 10	Introduction This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen inte...
	Cone Calorimeter Heat Release Test Machine	Products: Heat release quantity is the core parametersto evalatethe fire behavior of materials and products.TESTech'sCone Calorimeter canmeet al...
	Digital display electronic ink viscosity meter	How it works: The working principle of the digital display electronic ink viscosity meter is based on two tin (usually a metal roller and a rubber...
	Vibration Table	Standard ASTM D999: Vibration testing of shipping containers and packaged products. TAPPI T819: Corrugated box performance under simulated tran...
	Office Chair Caster Durability Tester	The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, structural reliability, and service life of office chair ...

Same products

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Seller: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Seller: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Seller: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Seller: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Seller: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...