Safety Helmet Flammability Tester，Safety Helmet Flame Resistance Tester
Product Introduction:
Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, easy to operate, widely used in safety hat manufacturers, major quality inspection units and construction engineering testing stations.
According to the criteria:
GB/T 2811-2007 "Hard Hat"
GB/T 2812-2006 "Safety Helmet Test Method"
GB/T 38305-2019 "Head Protection Rescue Helmet"
CEISO9001 1S017025
Product Advantages:
Measures Critical Safety Property: Quantifies the flame retardant performance of safety helmets, essential for protecting wearers in environments with fire hazards.
Standard Compliant: Designed to meet relevant national standards (GB/T 2811. GB/T 2812. GB/T 38305) for safety helmet flame resistance testing.
High Automation: Features a high degree of automation, ensuring consistent test execution and ease of use.
Provides Objective Timing: Includes precise timers for measuring afterflame and afterglow times.
Uses Standardized Flame Source: Utilizes a Bunsen burner with specified dimensions and allows the use of standard test gases.
Suitable for Safety Hats/Helmets: Specifically designed for testing head protective equipment.
Widely Used: Adopted by manufacturers and testing/inspection bodies in the safety helmet industry.
Product Features:
Standard Bunsen burner with a specified inner diameter (10mm) to provide the test flame.
Mechanism for positioning the Bunsen burner flame relative to the safety helmet or test specimen according to the standard's requirements.
Igniter timing system to control the duration for which the flame is applied to the specimen, with a wide adjustable range (0-999.9 seconds) and a typical setting (10 seconds).
Follow-on timer system to accurately measure the afterflame time (how long the specimen burns with a flame after the Bunsen burner is removed) and afterglow time (how long the specimen continues to glow without a flame), with a specified accuracy ($pm$0.01 seconds).
Flame length measuring device with a scale (50mm length) to ensure the test flame is set to the correct size.
Capability to use specified gases (methane, propane, butane, LPG) as the fuel for the Bunsen burner, as required by the test standard.
Fixture or system to securely mount the safety helmet or a test specimen cut from the helmet for testing.
High degree of automation for the test procedure, from flame application to timing.
Safety features (implied) for conducting flame tests.
Main parameters:
Inner diameter of Bunsen burner: 10mm
Igniter timing: 0 —— 999.9 seconds arbitrary setting, the international adoption of 10 seconds
Follow-on timer: 0 —— 999.9 seconds, accuracy: ±0.01 seconds
Flame length measuring device: scale length 50mm
Gas used: methane, propane, butane, LPG 3W '
Power supply: AC220V, 50Hz, 50W
Send product request
Other supplier products
 |
Melt Mass-Flow Rate Test Machine, ASTM D1238-98 | Introduction: This machine is deisgned according to ISO1133. ASTM D1238-98 ,ISO1133; Melt flow rate was measured using automatic sampling, weigh... |
 |
Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freque... |
 |
Cell thickness gauge | The Cell Thickness Gauge is a precision measuring instrument designed for accurate thickness measurement of lithium-ion battery cells. The system i... |
 |
Cylindrical Battery In-Situ Volume Swelling Testing System | Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliability and Abuse Testing ASTM E83... |
 |
Carpet Flammability Tester | Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
