Melt Mass-Flow Rate Test Machine, ASTM D1238-98

Introduction:

This machine is deisgned according to ISO1133. ASTM D1238-98 ,ISO1133; Melt flow rate was measured using automatic sampling, weighing scales manner; then, according to the formula to calculate the volumetric flow rate. Final results of the measurement are displayed on the LCD screen of the instrument, micro-printer output. The instrument measurement data is accurate, simple, intuitive, stable and reliable performance; It is suitable for fluorine plastic, nylon and other engineering plastics, it is also used in polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics - Determination of melting temperature lower. The instrument is easy to operate, the data is accurate, safe and reliable, widely used in the detection of the relevant departments in the field of plastic industry;

Standard:

ASTM D1238-98. ISO1133

Features:

1.The product uses PLC control, LCD display: time, temperature, sampling times.

2. Quality Act (MFR) measurement, high precision, accurate data.

1.Test Method: Quality Act (MFR)

2. Eight standard test load

1: 0.325kg = (piston + weight + pallet weight body lagging number +1) = 3.187N

2: 1.200 kg = (0.325 + 0.875 weight 2) = 11.77 N

3: 2.160 kg = (0.325 + 1.835 weight 3) = 21.18 N

4: 3.800 kg = (0.325 + 3.475 weight 4) = 37.26 N

5: 5.000 kg = (0.325 + 5 #4.675 weight) = 49.03 N

6: 10.000 kg = (0.325 + 5 #4.675 5.000 weight weight No. +6) = 98.07 N

7: 12.500 kg = (0.325 + 5 #4.675 +6 weight number weight 2.500 5.000 + 7) = 122.58 N

8: 21.600 kg = (0.325 + 0.875 weight number 2 + 3 + 4 1.835 5 4.675 + 3.475 + 5.000 + 6 7 8 2.915 2.500 + weight) = 211.82 N

Remarks; test load relative error ≤0.5%.

3.Temperature range 20 ~ 400 ºC; accuracy of ± 0.2 ºC; resolution 0.1 ºC

4.The test device:

Spout diameter: Φ2.095 ± 0.005mm

Spout length: 8.000 ± 0.025mm

Loading cartridge diameter: Φ9.550 ± 0.025mm

Loading cartridge length: 152 ± 0.1mm

Piston head diameter: 9.475 ± 0.015mm

Piston head length: 6.350 ± 0.100mm

5. Display: LCD display

6. The test report print at any time, to facilitate consolidation

7. Scraper: Auto / Manual

8. The power supply voltage: 220V ± 10% 50Hz

9. The instrument Dimensions: 510 × 370 × 600

10. Weight (kg): Host 25kg weight 21.6kg

11. Temperature range: --- 400 ºC.

12. Temperature accuracy: ± 0.2 ºC

13. Resolution: 0.1 ºC

14 .Working conditions: ambient temperature of 10 ºC -40 ºC; ambient relative humidity of 30% -80%; non-corrosive surrounding media, properly installed and adjusted to the level of a solid foundation. No strong air convection; around no vibration, no strong magnetic interference.

15. Power: 0.45KW

16. The index range: 0.1-400.00g / 10min (MFR)

17. Timing accuracy: 1S

18. Load: (0.325kg; 0.875kg; 0.96kg; 1.2kg; 1.64kg; 5kg;)

19. Cut material modes: manual, time control

20. Barrel inner diameter: 9.550mm ± 0.025mm

21. Barrel length: 160mm

22 .Die: made of tungsten carbide, length: 8.000mm ± 0.025mm inner diameter: 2.095mm ± 0.005mm

Other supplier products

	Wet leakage current test system of photovoltaic module	The Wet Leakage Current Test System is designed for high-precision evaluation of insulation resistance and leakage current in photovoltaic modules ...
	Tibial Tray Fatigue Testing Machine	Standard YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	The Powder Wet Vibrating Screen System is designed for particle size separation and distribution analysis of lithium battery materials under wet co...
	Scratch tester STD-KK02	Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo...
	Conveyor Belt Drum Friction Testing Machine	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction testing machine has extensive application value in mu...

All supplier products

Same products

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Seller: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Seller: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Seller: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Seller: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Seller: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...