Needle Flame Test Machine, IEC60695-2-2，ANSI needle flame test

• 

Introduction：

TESTECH Needle Flame Tester is in accordance with national standards IEC60695-2-2 and IEC60695-11-5to design andproduce.Thetester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials , plastic or other solid combustible materials industry to carry on small-flaming ignition experiments.

Needle flame tester uses standard size (Φ0.9mm) needle burner .and burns the sample with specific gas (butane) at the angle of 45 °.we determine the ignition risk of the small-flame caused by fault conditions in the equipment by testing the sample burningsituation,burningtime and burning length

Standard:

Comply with the relevant standards IEC60695-2-2 ,IEC60695-11-5.

Technical Parameters:

1. Needle burner is made of stainless steel:the hole dia. 0.5mm ± 0.1mm, diameter≤0.9mm, length≥35mm

2.Burner flame angle:0- 45 ° (arbitrary adjustment)

3. The combustion gases: 95% butane gas or propane gas;

4.Subplate: white pine plank ( 10mm),

Surface covered by standard silk paper

200mm ± 5mm below the flame

5. Temperature range: 0--1000 ºC

6. The flame temperature requirements: 100 ± 2 ºC ~ 700 ºC ± 3 ºC,

Heating rise time: 23.5 ± 1.0s;

7. The flame height: 12mm ± 1mm;

8. Ignition time: 0s ~ 999.9s adjustable, generally 30s;

9. Burning time: 0s ~ 999.9s, automatic recording, manual pause;

10. Test Space: ≥0.5m3. black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);

11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm)

12. Automatic test program , independent exhausting system;

13. Dimensions: L1120 * W520 * H1250mm,

The diameter of exhaust :Φ100mm;

14. Test power supply: 220V / AC, 50Hz

Other supplier products

	Ball Rebound Tester	Standard: DIN EN ISO 8307 ASTM D 3574 Main application scope and functions: This machine is designed and manufactured according to GB/T6670-97....
	Micro Rapid Closed Cup Flash Point Tester	Automatic Flash Point Tester designed for accurate and repeatable determination of the flash point of petroleum products using the Pensky-Martens c...
	Particle Abrasion Tester	The Particle Abrasion Tester (Q-4D) is a precision instrument designed to measure the wear rate of granular materials such as catalysts, molecular ...
	Model Coin-cell Swelling System	The Model Coin-Cell Swelling System is designed for in-situ measurement of thickness and volume changes of coin-type lithium-ion cells during charg...
	Image test standard transmission light box	Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art...

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...