building insulated material combustion tester
According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.
Building material burning performance testing machine meet the standards: EN ISO 11925-2, DIN 53438, DIN4102-1, GB / T 8626 and other standards.
technical parameters:
1, stainless steel structure box;
2, the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;
3, the flame height adjustable, automatic ignition;
4, the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;
5, gas pressure: 10KPa-50 KPa;
6, burning angle: 0 ° (vertical), 45 °
7, through the chassis outside the debug handle, the burner can move in the horizontal direction;
8, tempered glass door easy to observe the test;
9, stainless steel sample holder and sample template;
10, equipped with two kinds of stainless steel sample clip.Flame height gauge;
11, a high degree of experimental automation, experimental data accurate, easy to operate;
control system:
1, programmable controller (PLC) control:
2, automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;
3, optional automatic detection of wind speed, 6 samples of experimental data preservation;
4, the text display display;
5, real-time monitoring of experimental data, query 6 experimental data, query the alarm content.
6, the experimental abnormal sound alarm.
Send product request
Other supplier products
 |
Rubber Din Abrasion Tester | Rubber Din Abrasion TesterThe main purpose:Din rubber abrasion testing machine is mainly used for the abrasion resistance detection of an elastic m... |
 |
fabric color fastness to perspiration tester Test machine For Testing | Perspiration Tester is to determine colour fastness test to water, sea water, perspiration fastness in textiles and sublimation during storage. Per... |
 |
Universal Abrasion Resistance Tester | Introduction·The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close andfleec... |
|
|
astm d3786 pneumatic bursting strength tester | Pneumatic Bursting Strength Tester for Textile is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting st... |
 |
Maeser Water Penetration Tester | Applications: Maeser Water Penetration Tester is used to test footwear upper leather dynamic water resistance. It is suitable for all kinds of s... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
