Suture Needle Sharpness Intensity Tester
Suture Needle Sharpness Intensity Tester - Other test instrument - standard
Product Information:
The Sharpness and Strength Tester for Suture Needles is a device specifically designed to detect the sharpness and strength of medical suture needles. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:
Main Uses
Assessing Penetration Performance: By simulating the process of suture needles penetrating the skin or other media, measure the required puncture force, and thus evaluate the penetration performance of suture needles. This is crucial for ensuring the smooth use of suture needles in actual medical operations.
Quality Control: Used to detect the sharpness and strength of the tips of medical suture needles, ensuring that products meet relevant standards and regulations. It can promptly identify and eliminate non - compliant products, guaranteeing product quality. Procurement Decision - making: Helps medical institutions compare and select when purchasing suture needles, ensuring that the purchased suture needles have appropriate sharpness and strength to meet surgical needs. R & D Support: During the R & D process of medical suture needles, it provides key data support, helping researchers understand the impact of different materials, designs, and processes on the sharpness and strength of suture needles, so as to optimize product performance.
Compliance Standards
The detection standards of the Sharpness and Strength Tester for Suture Needles comply with the relevant regulations of YY/T 0043 - 2016 *Medical Suture Needles*. This standard puts forward clear requirements for the edge sharpness of suture needles. That is, at a specific cutting speed, the cutting force of the edge shall not exceed a certain threshold. The tester is designed and manufactured based on this standard, aiming to provide a reliable quality - control tool for the medical industry.
Technical Parameters
Operation Interface: Offers a simplified Chinese/English selection and supports Chinese - English switching. Testing Standard: Complies with the YY/T 0043 - 2016 *Medical Suture Needles* standard. Display Screen: A 7 - inch high - resolution touch screen is adopted. Control System: PLC control system, which dynamically displays the loading force value. Sensor: High - precision force value sensor with hardware and software protection functions. Testing Items: Include strength, puncture force, etc. Nominal Specification: The customizable range is 0.2 - 1.8mm. Die Hole Diameter: Φ5mm. Loading Rate: The speed is ≤10mm/s when loading to the set value. Hardness of Steel Block: HRC≥60. Printing Method: A miniature dot - matrix printer that can print test data and puncture force values.
Send product request
Other supplier products
 |
Battery diaphragm permeability tester | Meet the standard: GB/T458, ISO536/2, QB/T1667, GB/T23227, ISO2965, YC/T172, GB/T12655, S05636/3, IS05636/5, GB/T20042.7-2014, GB/T36363-2018, ... |
 |
G259A Sweating Guarded Hotplate-EN ISO11092 ASTMF1868-09 | Standards: GB/T11048. ISO11092. ASTMF1868-09. BS8515. ASTMD1518-2014. JIS L1096-2010. ASTM F 1868-02 Product Information: G259A Sweating Guarded... |
 |
Mask Respirator Breathing Resistance Tester | Standards: EN149-2009 section 7.15, 8.3.4, EN 13274-3, GB 19083, GB 2626, NIOSH 42 CFR Part 84, JIS/T 8151 Applications: Mask & Respir... |
 |
Safety Helmet Impact Acceleration Tester/ Helmet Impact Testing Machine / helmet impact acceleration tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
Rubbing fastness tester | Introduction Rubbing colour fastness tester STD-Jis is a standard testing machine, based on the friction tester type II (Gakushin type) specified ... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
