Anti-glare board drop weight testing machine
Anti-glare board drop weight testing machine - Other test instrument - standard
Product Information:
Scope of application:
The anti-glare board impact testing machine is designed and produced for each testing unit to measure the impact resistance of the anti-glare board, which is suitable for plastics, plastic products ceramics, glass fiber, tempered glass and other materials and test the hardness of coatings.
Meet the standard:
GB/T24718-2023,etc.
Instrument features:
With a sample holding device, to prevent inaccurate results caused by random sample projectiles;
With protective protection plate, to prevent the ball from secondary collision with the sample and the ball bounce injury;
Double overshoot protection, the overshoot motor automatically stops, need to be manually lifted to prevent damage to the instrument and protect the user;
Program with automatic memory function, power off or unplug, is still the memory setting before power off;
Motor with holding brake function, the arm will not slide down in the case of power failure;
Laser rangefinder ranging, ranging accuracy;
Two modes of operation, namely automatic and manual two ways;
Low-voltage components such as: brand buttons, relays, AC contactors, etc., stable performance, safe and reliable;
Easy to install, easy to operate, long service life.
Technical parameters:
Electromagnet suction 50kg
The steel ball weighs 1kg±10g
Steel ball diameter 63mm
Cantilever extension length 350mm（310mm from the center of the ball）
Cantilever lifting stroke 300mm（i.e. impact height can be adjusted at 900-1200）
Laser sensor measurement accuracy 1mm
The laser sensor has an error of 5 parts per thousand
Laser spot 0.5-1mm
The diameter of the anti-secondary impact partition is 65mm, and the height is adjustable from 20-110mm
Weight 130kg
Standard configuration:
1. One host
2. 1 standard iron ball
3. One national standard power cable
4. Product packing list 1 copy
5. 1 copy of product manual
6. One copy of product certificate
Send product request
Other supplier products
 |
Protective Clothing Resistance Tester | Scope of Application: This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying ... |
 |
Leather Vamp Flexing Extensibility Testing Machine/ISO 5423 section 5.2 | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Main uses 1. microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brak... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo... |
 |
Medical Mask Differential Pressure Tester EN 149 EN 14683 | Standards: EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013 Applications: Medical Mask Differential Pressure Tester... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
