Acid Penetration Tester
Acid Penetration Tester - Textile and Apparel - standard
Standards:
GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chemicals-determination of resistance of protective clothing materials to permeation by liquids and gases. BS EN 463-1995 Protective clothing-protection against liquid chemicals- Test method determination of resistance to penetration by a jet of liquid (Jet test) BS EN 468-1995 Protective clothing– protection against liquid chemicals, performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing( type 4 equipment)
Applications:
Acid penetration tester is used for water proof air permeability testing of high density fabric, laminated fabric, and coating material etc. Such as canvas, such as canvas, felt, tarpaulin , cover cloth, airtight fabric, outdoor sports material, umbrella testing and waterproof material testing etc. It can be also used for testing liquid and blood permeability testing of medical protective clothing, and chemical material liquid permeability testing of chemical protective clothing, liquid permeability testing of non-woven, filter material, it can be also used for water permeability testing of paper and card board .
Product Information:
Introduction
Acid penetration tester is mainly used for measuring the penetration time of acid and alkali proof chemical fabrics.
Features
Technical Parameters
| Item | Parameters |
| Specimen size | 100mm*100mm |
| Solution | 0.1mL（conductive method）or 10mm height（indicator method )self provide 50mL beaker |
| Testing condition | Temperature：17-30℃，Relative humidity:（65±2）%RH |
| Timing | 0-99.99s |
| Accuracy | ±0.01s |
| Max acid pressure | Above 150mm H2SO4（80%） |
| Acid pressure rise rate | 60±0.5cm H2SO4/min |
| Measuring range | 0-150mm H2SO4（80%） |
Send product request
Other supplier products
 |
Mechanical load testing machine for photovoltaic modules | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
Catheter Residual Vacuum Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Residual Vacuum Tester The catheter residual vacuum ... |
 |
digital elmendorf type tearing strength tester | digital elmendorf type tearing strength tester - Textile and Apparel - standard The Digital Elmendorf Tearing Tester is using Elmendorf method to ... |
 |
Mask flame retardant tester EN 149 YY 0469 | Standards: GB 19083-2010. EN 149. GB 2626. YY 0469 Applications: Mask Flame Retardant Tester is a special test instrument for flame retardant pe... |
 |
Femoral Condyles Components Fatigue Performance Tester | Standard ASTM WK51649: Specifies fatigue testing protocols for metallic femoral components in total knee arthroplasty, including F-N curve gener... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
