Water Vapor Permeability Testing Apparatus
Water Vapor Permeability Testing Apparatus - Other test instrument - standard
Standards:
JIS L1099A Testing methods for water vapour permeability of textiles JIS Z 0208 Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials
Applications:
The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the waterproof, moisture permeability of both the fabric, as well as plastic film, processed paper and other moisture-resistant packaging materials for the purpose of moisture permeability evaluation test.
Product Information:
The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the waterproof, moisture permeability of both the fabric, as well as plastic film, processed paper and other moisture-resistant packaging materials for the purpose of moisture permeability evaluation test.
Place a quantity of anhydrous calcium chloride into the empty moisture-permeable cup. Then install the sample and seal the moisture-permeable cup with the sample. The moisture permeable cup of the sealed package was placed in a laboratory for fixed temperature and humidity conditions for a period of time, and the moisture permeability of the sample was calculated by increasing the weight of anhydrous calcium chloride, thereby determining the moisture permeability of the sample.
Technical Parameters
| Items | Parameters |
| Temperature range | 20-50℃（Accuracy ：±0.3℃） |
| Moisture range | 50-95%（Accuracy ：±2.0%） |
| Freezer | Air-cooled airtight compress |
| Cooler | Multi - stage heat sink cooler |
| Humidifier | Pot-type humidifier |
| Heater | Finned radiator |
| Circulating blower | Blower |
| Disc sample rack | 270mm、2 paragraphs |
| Rotation speed of sample rack | 8r.p.m |
| Water supply method | Pump pumping |
| Water tank | 10L |
| Moisture-permeable cup | JIS L 1099A Act requirements (10 groups) |
| Power | AC 100V 50/60HZ 3KW |
| Indoor dimension | W350×D350×H500mm |
| Outside size | W1100×D550×H1500mm |
Send product request
Other supplier products
 |
Hardened Concrete Bubble Spacing Coefficient Analyzer | Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: DL/T 5150-2001 Test Code for Hydraulic Conc... |
 |
Stain resistance tester for architectural coatings | Product Introduction: The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often... |
 |
Falling ball impact testing machine | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
 |
Electrostatic Decay Tester | Production: Electrostatic Decay Testeris professional designed to determine the attenuation of static electricity, corona discharge time, static v... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequen... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
