Acceleration Impact and Penetration Testing Machine for Safety Helmets
Acceleration Impact and Penetration Testing Machine for Safety Helmets - Flammability Testing equipment price quotation - standard
Standards:
GB/T2812
Applications:
Suitable for impact - performance tests of safety helmets, used to evaluate the impact - resistance performance of safety helmets.
Product Information:
Technical Parameters for Impact Test
1. The base is made of reinforced concrete, and its mass is not less than 500 kg.
2. The numerical analysis system consists of force sensors, single - axis acceleration sensors, data processing, display, and recording components; it can conduct side - force impact tests. 3. Total height of the machine: approximately 4.2 meters 4. Weight of the impact hammer: 5.0 + 0.1kg, with a hemispherical impact surface, a radius of 50±1mm, and made of stainless steel 5. Impact height: 1000±5mm 6. Equipped with a force sensor, with a measurement range of (0 - 20000) N and a minimum frequency response of 5KHZ 7. Force sensor
Send product request
Other supplier products
 |
E-bike chassis dynamometer testing machine | Meet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, a... |
 |
American European bending tester | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose cho... |
 |
Safety shoe impact testing machine | According to the criteria: Bs-953,1870,EN-344,ANSI-Z41,CSA-Z195 ISO K88782 Technical parameters: Weight of drop hammer: （EN） 20±0.2kg,（... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber/ head protection thermal testing equipment / Helmet high temperature pre-treatment chamber | Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Te... |
 |
G650D Finished shoe bending tester (heel lift) | The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag Angle matched by the sh... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
