Tester for Safety Helmets Against Molten Metal Splashing
Tester for Safety Helmets Against Molten Metal Splashing - Flammability Testing equipment price quotation - standard
Standards:
GB/T2812 - XXXX, GB 2811-2019
Applications:
Mainly used for the performance test of safety helmets against molten metal splashing.
Product Information:
Main Indicators
1. Pouring height: The standard height is 225±5mm, and it is adjustable with an adjustment range of 100mm. 2. Pouring temperature: 0 - 1800°C, with the standard temperature being 1400±20°C. 3. Molten metal: A 150±10g iron part with an iron content of not less than 93%, melted into a liquid. 4. Cooling methods: Water - cooling for the control system and air - cooling for the test chamber. 5. Instrument dimensions: 1250*750*1350mm. 6. Instrument power supply: 380V, 50HZ, 25KW
Send product request
Other supplier products
 |
Carbon Black Content Tester/ Rubber Carbon Black Tester / Carbon Black Concentration Tester | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and as... |
 |
PV Hail Impact Tester | Content 1. Standard Compliance IEC 61215: Mechanical load testing for terrestrial photovoltaic modules. UL 61730: Safety standards for photovolt... |
 |
G612 national standard shoe wear testing machine | The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press the rotating grinding h... |
 |
Coating abrasion resistance tester | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Circular Locus Pilling Tester | The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product ... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
