EN sole zigzag testing machine
Product Introduction:
The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect its bending resistance and the ability to resist the growth of the incision, that is, the zigzag resistance.
Reference standard:
SATRA TM161, GB/T2099-2007, ENISO 20344-2011, EN ISO17707, ENISO-20344, DIN53543 and other standards.
Technical parameters:
1, the number of stations: 1, 3 stations （at the same time can measure 1, 3 outsole）
2, bending Angle: （90±2）º
3, speed: 5——150cpm adjustable
4, point function: sample installation, one-key self-positioning function
5, volume: 86*46*80cm
6, zigzag shaft diameter: 30mm
7, Protective cover: inductive safety cover
8, Power supply: AC220V, 10A
Send product request
Other supplier products
 |
Hydraulic Pump Contamination Resistance Tester | Hydraulic pump pollution resistance test bench is mainly used to detect the fuel pump in the specified concentration of pollution in the operating ... |
 |
Oil-Water Separation Tester | Applicable Standards: (1)ISO/ TS 16332-2006 Diesel engine diesel filters Fuel Water Separation Efficiency Assessment Method. (2) ISO 4020-2001 ... |
 |
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
vertical flame test chamber | Standards: ASTM D6413, CALIF TB117, DOC-FF 3/71, 16CFR Parts1615/1616, FTMS 191-5903, CPAI 84 Applications: The vertical burning of textil... |
 |
Respiratory Resistance Tester | Respiratory Resistance Tester Introduction: The respiratory resistance tester is used to determine the inspiratory and expiratory resistance of re... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
