Paper dust meter
Product Information:
Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc.
The dust degree tester is lightweight in structure, convenient in experiment and equipped with different contrast pictures, and is widely used in major papermaking enterprises, quality inspection centers, press and publication centers and other units.
Test principle:
On each square meter of paper or cardboard, the dust degree is expressed by the number of dust with a certain area or by the equivalent area of dust on each square meter of paper or cardboard.
Technical parameters:
Irradiation Angle: 60°
Table: Effective area of 0.0625 square meters, can be rotated 360°
Standard dust picture: 0.05 —— 5.0（㎜2）
Standard dust comparison diagram: 0.04 —— 5.0（㎜2）
Light source: 20W fluorescent lamp
Power supply: 220V 50Hz
Dimensions: 340mm×360mm×480mm（length × width × height）
Meet the standard:
GB/T1541-2007 Paper and board dust determination
Standard configuration:
Main engine, standard dust map, comparison map
Send product request
Other supplier products
 |
Seat Bumping and Creep Test Bench | Content This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car sea... |
 |
Automated Image Stitching Measurement System | Performance Overview: Automatic one-key flash splicing special measuring instrument is a one-key fast special measuring equipment designed and man... |
 |
Film impact Tester (Gardner) | Meet the standard: GB/T 1732-2020 ASTM D2794 ISO 6272 Product Introduction: The coating impact resistance test device is mainly used to te... |
 |
Dust Filter Efficiency Test System | Dust Filter Efficiency Test System - Filter material testing instruments price and quotation - standard Standards: 1. ASTM D6830-02 Standard te... |
 |
Sweating Guarded Hotplate/ Thermal Insulation and Moisture Permeability Tester / Fabric Thermal Resistance Tester | Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates t... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
