Horizontal Vertical Combustion Tester
Standards:
UL94 Test for flammability of plastic materials for parts in devices and appliances ISO 1210 Plastics -- Determination of the burning behaviour of horizontal and vertical specimen GB/T2408-2008/IEC:1999 Plastics-Determination of burning characteristics- Horizontal and vertical test GB/T 5169.16-2008/IEC :2003/ASTM D635 Fire hazard testing for electric and electronic products. Part 16:Test flames. 50W horizontal and vertical flame test methods GB/T 8332-2008/ISO 9772-2001/ASTM D 4986 Test method for flammability of cellular plastic-Horizonal burning method ASTM D4804 /ISO 9773 Standard test method for determining the flammability characteristics of non-rigid solid plastics
Applications:
Horizontal and vertical combustion tester is mainly used for measuring the burning performance of plastic, rubber or film at a predetermined fire source, to determine its fire resistance rating. It can be applied not only for the research, production and quality control departments of lighting, low-voltage electrical appliances, household appliances, electrical machine, tools, instruments as well as electrical connections and other electrical and electronic plastic or rubber products and component parts, but also for the type approval of insulation, plastic , fire blocking material or other solid combustible materials industry.
Product Information:
Horizontal and vertical combustion tester is to simulate the early situation of a fire around the electrical environment .By simulating the actual situation, the tester can assess the material fire risk, product resistance to ignition and safety characteristic of no flame spread . Horizontal and vertical combustibility tester can test material’s burning performance, burning rate, flame spread, combustion strength and product flame resistance properties.
Features
◆The ultra - large transparent observation window makes it easy to observe the burning state of the specimen;
◆Humanized design of the door opening way. It is an easy way to touch the sample and burner;
◆PLC touch screen control is easy to set parameters;
◆Different test methods modular is easy to operate;
Accessories
Configuration
Base unit
F241G Calibration copper
F241G01 Cotton tray
233G02 HB Support Fixture
Optional parts
F241H Foam Support Fixture
F241G03 Support-Gauze
F241G04 Burner Wing Tip meets the requirements of ASTM D4986 standard
F241G05 Specimen Mandrel Form
Technical Parameters
| Items | Parameters |
| Inter Size | 850mm×600mm×1000mm |
| Vent (above) | Φ135mm×85mm |
| Burning angle | 45 °，90 ° （0 °） Adjustable |
| The specimen holder can be moved horizontally vertically | |
| Flame time | 5s, 10s, 30s, 60s optional |
| Combustion timer | Timer (accurate to 0.1s) |
| Burner | Length 100 ±10 mm, Inner diameter 9.5 ±mm 0.3, ASTM D 5025 |
| Outline size | 1200mm * 620mm * 1300mm |
| Weight | 90kg |
| Power supply | 220V, 50Hz |
Send product request
Other supplier products
 |
Helmet Xenon Aging Tester | Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by C... |
 |
ICI Mace Snag Test machine | Standards: ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method) GB/T 11047 Textiles-Determination of fabrics sn... |
 |
Seat Ingress/Egress Simulation Tester | Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for S... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
Negative pressure tester for medical syringes | Negative pressure tester for medical syringes - Other test instrument - standard Standards: YY0053-2008, GB 15810-2019 single-use sterile syrin... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
