High Velocity Impact Testing Machine
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010
EN 166. EN 168
ANSI Z87.1. MIL - PRF - 32432
ISO 4855
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
Send product request
Other supplier products
 |
Office Chair Caster Durability Tester | The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, structural reliability, and service life of office chair ... |
 |
PV Environmental Test Chamber | Features and Benefits 1.PV environmental test chambercan accurately simulate various temperature and humidity conditions, and the temperature devi... |
 |
Sole heat resistance testing machine丨Sole heat resistance tester | Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high... |
 |
UL94 Horizontal Vertical Flame Tester，dual-axis flame tester | Introduction Rubber horizontal vertical flame testeris designed to simulate the early firing situation of electronic and electrical products in or... |
 |
Thermal Conductivity Tester for Silicone and Ceramic Substrates，ASTM D5470 industrial and lab material thermal tester | Thermal Conductivity Tester for Silicone and Ceramic Substrates is a high-precision instrument designed to measure thermal resistance, thermal cond... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
