Helmet Projection and Surface Friction tester
The helmet projection and surface friction tester is a device used to test the frictional force between the helmet surface and other objects. Its main purpose is to ensure that the helmet has sufficient friction during use to prevent slipping or detachment, thereby improving safety.
Application
Produced according to helmet related standards, it is mainly used to test the shear force and friction performance of the surface raised structure of motorcycle helmets and electric vehicle helmets. Widely used in various helmets related production, scientific research, quality supervision and testing units.
Standards
GB811:Helmets for motorcycle and electric bicycle users
ECE R22.05:ECE R22.05 Motorcycle Helmet Standard
Features
1. PLC touch screen control.
2. Horizontally oriented carrier with exchangeable installation of sandpaper and cutter.
3、Head type can be rotated 360.
4、Equipped with professional speed measuring tooling.
Parameters
| Technical Parameter | Description |
|---|---|
| Friction sandpaper | Length: 300mm - 303mm; Grade 80 aluminum oxide coated sandpaper |
| Steel cutter | Height: 6mm; Width: 25mm; The top edge is chamfered with a radius of 1mm |
| Impact weight | 15kg - 15.5kg |
| Weight fall height | 0 - 1000mm |
| Pre-loaded weight | 400N - 410N |
| Sensor range | 0 - 120mm |
| Instrument power supply | 220V 50Hz |
Accessoriess
Abrasive sandpaper
Steel cutting blade
Weights
Weight dropping device
Preloading device
Sensor
Head form
Specimen holder
Test Procedures
Mount the helmet onto the head form.
The support frame is rotated by a telescopic cylinder, and the support frame drives the sliding frame, rotating frame, and head form to move.
The head form moves the helmet, and by adjusting the position of the sliding frame and the angle of the head form, the part to be tested is connected to the loading platform.
During the shear force test, a steel cutter with a height of 6mm and a width of 25mm is installed on the loading platform. The surface of the cutter is subjected to carburizing and hardening treatment to a depth of 0.5mm.
The lifting component drives the loading platform to move, allowing the loading platform to move towards the helmet.
The lifting component drives the loading platform to move, causing the loading platform to slide relative to the helmet for the shear force test.
During the friction force test, a piece of aluminum oxide coated sandpaper with a length of 300mm and a grade of 80 is installed on the loading platform.
Adjust the position of the helmet so that the part of the helmet to be tested can slide and rub against the sandpaper.
Repeat steps 5-8 to perform the friction force test.
Send product request
Other supplier products
 |
Battery Powder resistivity meter | Standards YS/T 587.6-2006 GB/T 24525-2009 GBT 30835-2014 Product Advantages Unmatched Measurement Flexibility Dual-probe compatibility: Switc... |
 |
Drawer slide durability testing machine | The Drawer Slide Durability Testing Machine is designed to evaluate the mechanical durability, operational reliability, and service life of drawer ... |
 |
Aluminum Tube Internal Coating Continuity Tester | The continuity tester for the inner coating of aluminum tubes is an important device specifically used to detect the continuity of the inner coatin... |
 |
Thermal cycle wet freezing testing machine | The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental testing, capable of simulating extreme temperature and h... |
 |
Face Mask Airflow Resistance Measurement tester | Standards: GB19083-2010 technical requirements for medical protective masks Applications： Quality control in production process. Testing in res... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
