Helmet Surface Friction Testing Machine
A helmet surface friction testing machine is a device used to test the frictional force between the surface of a helmet and other objects. Its main purpose is to ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
Application
The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached with sandpaper of the grain size specified in the standard. Then, the test helmet is moved across the surface of the sandpaper at a certain speed, so as to evaluate the abrasion - resistance performance of the helmet.
Standards
GB 811-2022:Helmets for motorcycle and electric bicycle users
Features
1、PLC touch screen control
2、Horizontally oriented carrier with exchangeable mounting of sandpaper and cutting knives
3、Head type can be rotated 360
4、With professional speed measuring tooling
Parameters
| Item | Detail |
|---|---|
| Friction sandpaper | 300mm - 303mm long, grade 80 aluminum oxide coated sandpaper |
| Steel cutter | 6mm high, 25mm wide, with the top edge chamfered at a radius of 1mm |
| Impact weights | 15kg - 15.5kg |
| Fall height of the weight | 0 - 1000mm |
| Pre-loaded weight | 400N - 410N |
| Sensor range | 0 - 120mm |
| Instrument power supply | 220V 50HZ |
Accessoriess
Abrasive sandpaper
Steel cutting blade
Movable clamp
Horizontal guide rail and support frame, etc.
Test Procedures
The helmet is pressed against a movable clamp with a certain force.
The surface of the clamp is covered with sandpaper of a standard specified grit size.
The helmet is then moved across the sandpaper surface at a certain speed.
The friction resistance of the helmet is evaluated by observing and measuring the frictional force.
These steps ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
Send product request
Other supplier products
 |
Fabric Vertical Flame Spread Test Machine with ISO 6941 | Products: This machine is suitable for one-component or multi-component (coating, quilt, layered, laminated products, and similar combinations) of... |
 |
Falling Ball Impact Resistance Testing Machine | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials... |
 |
Solar Simulator Tester | Recommended related instruments: Solar Simulators The Solar Simulator is a brand-new solar energy simulator that provides a completely new solar e... |
 |
Solid Auto - ignition Point Tester | This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wir... |
 |
Resistance of Materials to Molten Metal Splash | Description: The tester is according to the ISO 9185-2007.This International Standard specifies a method for assessing the heat penetration resi... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
