Thrust Bearing Rolling Friction and Wear Testing Machine
Applicable Standards:
ASTM D3702
ASTM G99
ASTM G77
ISO 18535
Product Advantages:
Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation.
Quantifies Friction and Wear: Provides objective, measurable data on key performance indicators.
Enables Material and Lubricant Comparison: Facilitates the evaluation and selection of the best materials and lubricants for specific applications.
Predicts Bearing Life: Wear rate data can be used to estimate the expected lifespan of thrust bearings.
Supports Design Optimization: Provides critical feedback for improving bearing designs to reduce friction and wear.
Standardized Testing: Allows for testing according to recognized industry standards.
Technical data:
Maximum radial load: 5 kN
Maximum spindle diameter: 5 to 30 mm
Spindle taper: DIN 69871A, ISO 50 taper
Rotary motion:
Speed: 0 to 2000 rpm
Continuous torque: 56.4 Nm
Peak torque: 136 Nm
Oscillating motion:
Ranges: variable 0 to +/-20°
Frequency: 0.001 to 1 Hz
Axial motion:
Maximum thrust: 5 kN Stroke: 0 to 30 mm Frequency: 0.001 to 1 Hz kN
Stroke: 0 to 30 mm
Frequency: 0.001 to 1 Hz
Send product request
Other supplier products
 |
Bally Type Flexometer丨Bally Type Flexometer Meter | Standards EN ISO 20344:6.6. I.U.P.10+20. I.U.P.20. UNI 4818. DIN 53.351. UNE/I.U.P.20 Applications The Bally flexometer is the internationally-a... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro... |
 |
Bone Plates Static Four - point Bending Tester | Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending strength and equivalent bending stiffness of straight and pre... |
 |
Diaper impurity testing machine | The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual... |
 |
Safety Helmet Impact Acceleration Tester | The safety helmet impact acceleration tester is an instrument used to test the performance of safety helmets when subjected to impact. It can simul... |
Same products
|
|
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
